Dell N1548P Firmware Upgrading Instruction

Dell N1548P Firmware Upgrading Instruction

Emcnetworking switches

Advertisement

Dell EMC Networking N1524/N1524P/N1548/N1548P
Upgrading Dell EMC Networking
N1500 Series Switches to
6.5.2.9 Firmware
Date: September 2018
Information in this document is subject to change without notice.
Copyright © 2018 Dell Inc. All rights reserved.
This product is protected by U.S. and international copyright and intellectual property laws. Dell and the Dell logo are
trademarks of Dell Inc. in the United States and/or other jurisdictions. All other marks and names mentioned herein may be
trademarks of their respective companies.
Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.
Trademarks used in this text: Dell, the DELL logo and PowerConnect are trademarks of Dell Inc; Intel and Pentium are registered
trademarks and Celeron is a trademark of Intel Corporation; Microsoft and Windows are registered trademarks of Microsoft
Corporation.
Other trademarks and trade names may be used in this document to refer to either the entity claiming the marks and names or
their products. Dell Inc disclaims any proprietary interest in trademarks and trade names other than its own. All rights reserved.
This document may not, in whole or in part, be copied, photocopied, reproduced, translated, or reduced to any electronic
medium or machine-readable form without the prior written consent of Dell. Dell reserves the right to make changes without
further notice to any products or specifications referred to herein to improve reliability, functionality or design.
Reproduction, adaptation or translation without prior written permission is prohibited, except as allowed under the copyright
laws.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the N1548P and is the answer not in the manual?

Questions and answers

Summarization of Contents

Introduction and Overview
Global Support
Information on finding the latest firmware, release notes, and additional assistance.
Firmware Upgrade Overview
Details on accessing the CLI, requirements, and general procedure for firmware upgrades.
Firmware Downgrade Overview
Information and important considerations for downgrading switch firmware to earlier versions.
Single Switch Firmware Upgrade Procedure
How to Access Serial Console
Instructions for connecting to the switch's serial console for management and troubleshooting.
Firmware Upgrade Example
A detailed walkthrough with annotated commands for upgrading a Dell EMC N1500 Series switch.
Downloading and Activating Firmware
Steps for downloading the firmware image via TFTP and activating it as the boot image.
Upgrade Stack of Dell EMC Networking N1500 Series Switches
Stack Upgrade Considerations
Notes on the 'copy' command for stacks and distribution of code to member switches.
Verifying Stack Upgrade
Instructions to verify firmware version and reboot the stack after upgrade.
Switch Recovery Procedure
Switch Recovery Steps
Procedure for recovering a switch by connecting individually via serial port and loading new code.
Switch Recovery Example
Demonstration of the switch recovery process using the boot menu and TFTP.

Table of Contents

Save PDF