Transmission cover
- Unloose the 7 fixing screws
- Remove the cover and net filter
N.B.: Disassemble the net filter only if it is to be replaced.
Belt antiflapping roller
- Check that the roller is in good condition and that it
turns freely.
- Unloose the fixing screw with a 13 mm wrench
- Remove the roller and relevant bearing.
N.B.: If the roller does not turn freely, replace it.
Driving pulley
- Turn the pulley central nut with a 27 mm wrench to align the internal holes horizontally, therefore allowing
for the specific tool fitting.
Specific tool: Driving pulley lock wrench 020474Y
28