Related Manuals for hydro-s A10/32
Summarization of Contents
Introduction
This Manual
Manual provides necessary product information for use and maintenance.
The Unit
Heat pump is economical, uses renewable energy, and extends swimming season.
Features
Highlights key benefits like ecological heating, titanium heat-exchanger, multiple functions, and reliable operation.
Safety Instructions
General Safety Precautions
Covers installation and operation safety, including warnings against DIY, improper wiring, and touching moving parts.
Installation
Installation Information
Provides guidance for understanding the installation process, not direct instructions.
Condition of Installation
Offers information to help users better understand installation requirements.
Installation Place
Specifies requirements for the installation location, including surface stability and clearance.
Perfecting Your Installation
Offers advice on placement to avoid noise, vibrations, and difficult maintenance conditions.
Water Connection
Explains how to connect the heat pump to the filtration circuit using a by-pass.
Electrical Connection
Details electrical supply requirements and cable sizing for proper connection.
Starting Up For The First Time
Provides a step-by-step guide for the initial startup process after installation.
Controller
Display and Operation Surface
Illustrates the controller's display and identifies key buttons like power, set, up, and down.
Definitions
Defines the functions of the controller's buttons: power, SET, UP, and DOWN.
SPT Setting
Explains how to adjust the Set Point Temperature (SPT) and its adjustable range.
Parameter Query
Describes how to query parameters using the controller's interface.
Parameter Checking and Adjustment
Parameter Setting
Details how to enter parameter setting mode and lists parameters for unit operation.
Protection Functions
Explains protection mechanisms like T2 under-temperature, T1 sensor fault, and T2 sensor fault.
Fault Codes
Lists fault codes (E0-E5) and their corresponding descriptions for troubleshooting.
Wiring Diagram
Wiring Diagram for A5/32, A7/32
Illustrates the electrical connections for the A5/32 and A7/32 heat pump models.
Wiring Diagram for A10/32, A13/32
Illustrates the electrical connections for the A10/32 and A13/32 heat pump models.
Maintenance
General Cleaning
Covers cleaning of external parts, pipe system, and air system for optimal performance.
Winter Shutdown/Lay-up
Provides instructions for draining the water circuit to prevent frost damage during winter.
Troubleshooting
General Troubleshooting Tips
Offers initial checks for common issues like the heat pump not running or not reaching set temperature.
Recycling
Environmental Information
Details the environmental impact of refrigerants and compliance with protocols like Kyoto.
Disposal Requirements
Outlines procedures for responsible disposal of the unit and its components according to legislation.
Need help?
Do you have a question about the A10/32 and is the answer not in the manual?
Questions and answers