Related Manuals for hydro-s A5/32
Summarization of Contents
Introduction to the Swimming Pool Heat Pump
The Unit
Describes the swimming pool heat pump and its advantages for heating efficiency.
Key Features
Highlights key features like ecological heating, titanium heat-exchanger, multiple functions, and reliable operation.
Installation Guide
Installation Place Requirements
Details guidelines for selecting a suitable and safe location for the heat pump installation.
Water Connection Setup
Explains how to connect the heat pump to the filtration circuit using a by-pass.
Electrical Connection Procedures
Covers requirements for electrical supply, cable sizing, and connection safety.
First-Time Startup Procedure
Provides step-by-step instructions for the initial operation and setup of the heat pump.
Controller Operation
Controller Button Definitions
Explains the functions of the controller buttons (Power, SET, UP, DOWN).
Setting the Target Temperature
Describes how to adjust the set temperature (SPT) and its adjustable range.
Parameter Query Functionality
Details how to query various parameters like water temperature and ambient temperature.
Parameter Checking and Adjustment
Parameter Setting Guide
Guides users on how to enter and modify operational parameters like mode, hysteresis, and temperature limits.
Protection Functions Explained
Explains various protection mechanisms such as under-temperature, sensor faults, and power failure.
Fault Code Reference
Lists and describes common fault codes (E0-E5) and their causes.
Recycling and Disposal
Environmental Information
Discusses the environmental impact of refrigerants and compliance with protocols.
Disposal Requirements
Outlines legal requirements for dismantling, refrigerant, oil, and part disposal.
End-of-Life Disposal Options
Presents options for product disposal or recycling at end-of-life.
Need help?
Do you have a question about the A5/32 and is the answer not in the manual?
Questions and answers