Table of Contents
Advertisement
HC
Safety and operating instructions
Hydraulic compactor
Valid from serial number
HC 150
BGB890301
HC 350
BGB890301
HC 450
BGB890301
HC 850
BGB890301
HC 1050
BGB890301
HC 1055
BGB890301
© 2014 Construction Tools EOOD | No. 3390 5121 01 | 2014-11-19
Original instructions
150, 350, 450, 850, 1050, 1055
Advertisement
Table of Contents
Related Manuals for Atlas Copco HC 850
Summarization of Contents
Introduction
About these Safety and Operating Instructions
Explains the purpose and importance of the manual.
Safety Instructions
Signal words
Defines warning levels (Danger, Warning, Caution, Notice).
Qualification
Specifies who is authorized to perform tasks.
Intended use
Describes the proper applications for the compactor.
Transport, precautions
Outlines safety measures during transport.
Hydraulic installation, precautions
Safety measures for hydraulic system setup.
Media/consumables, precautions
Precautions for handling hydraulic oil and other fluids.
Falling stones, precautions
Safety measures against flying debris and falling objects.
Environmental pollution, precautions
Guidelines to prevent environmental damage from oil spills.
Overview
Equipment description
Identifies and describes the main parts of the hydraulic compactor.
Function
Explains the working principle and applications of the compactor.
Name plate
Details information found on the product's name plate.
Transport
Transport using a crane
Step-by-step guide for transporting via crane.
Transport using a forklift truck
Step-by-step guide for transporting via forklift.
Installation
Media/consumables
Lists required hydraulic oils and their specifications.
Installing the rotating mechanism
Instructions for fitting the optional rotating mechanism.
Attaching the hydraulic attachment to the carrier
Procedure for connecting the compactor to the carrier.
Making the hydraulic connections
Guide for connecting hydraulic hoses and lines.
Operation
Preparations before starting
Checks and procedures before operating the compactor.
Correct operation
Guidance on proper compacting and operational techniques.
Prohibited operation
Lists unsafe or forbidden uses and operations.
Maintenance
Maintenance schedule
Schedule for daily, weekly, and periodic maintenance tasks.
Depressurising the hydraulic system
Procedure to safely release hydraulic pressure.
Checking hydraulic lines
Instructions for inspecting hydraulic lines for leaks and damage.
Bolt connections/Tightening torques HC 150 - HC 450
Specific tightening torques for bolts on HC 150-450 models.
Troubleshooting
Hydraulic attachment does not work
Diagnosing and resolving issues where the attachment is non-functional.
Tamper plate frequency too low
Troubleshooting low tamper plate frequency.
Insufficient impact force
Addressing problems related to reduced impact force.
Repair
Sending in the hydraulic attachment for repairs
Procedure for sending the attachment for professional repair.
Replacing worn rubber isolators
Steps for replacing worn rubber isolators.
Replacing rotor and/or O-Rings of covers
Guide for replacing rotor or O-rings in covers.
Storage
Hydraulic compactor
Instructions for safely storing the hydraulic compactor.
Technical Specifications
Hydraulic compactor HC 150 - HC 450
Technical data for HC 150 to HC 450 models.
Hydraulic compactor HC 850 - HC 1055
Technical data for HC 850 to HC 1055 models.
EC Declaration
EC Declaration of Conformity (EC Directive 2006/42/EC)
Statement of compliance with EU directives and standards.
Need help?
Do you have a question about the HC 850 and is the answer not in the manual?
Questions and answers