Related Manuals for albutt F155A
Summary of Contents for albutt F155A
- Page 1 INSTRUCTION MANUAL PARTS CATALOGUE ALBUTT BALE HANDLERS (TINED VERSIONS) THIS MUST BE USED IN CONJUNCTION WITH THE ALBUTT GENERAL OPERATOR’S MANUAL www.albutt.com | 01242 620 252 | keith@albutt.co.uk...
- Page 2 CONTENTS Certificate….…………………….…………………………3 Safety Instructions…..…..…………….……………4-6 Machine Capabilities…………………………………..7 Operating Instructions…………………………..…8-9 Hydraulic Safety………………………..………………10 Parts Diagrams.………………….…………….….11-16 www.albutt.com | 01242 620 252 | keith@albutt.co.uk...
- Page 3 GL20 7AR declare in sole responsibility, that the products Type: F100, F110, F125, F131, F131FT, F140A, F150A, F155A, F160A, F301, F501, F650HX, ES100, CS100 to which this certificate applies, conforms to the basic safety and health requirements of the EC Machinery Directive 2006/42 EC,...
- Page 4 Please keep this manual for future reference. INTENDED USE The intended use of Albutt bale spikes and grabs (F range) is for the safe lifting of compacted bales of straw, hay, haylage and silage both wrapped or unwrapped using user preference to prevent damage to wrap.
- Page 5 These do not come supplied with the attachment. Always use the correct mounting bracket and ensure that it is fitted by a trained and competent operator who has been approved by your Albutt dealer. It is recommended to use a bolted connection to attach the mounting bracket.
- Page 6 If stacking bales always ensure that the ground is level and stable and the stack is secure and adequately supported. NEVER attempt to move the implement manually. We recommend that genuine Albutt bolt on brackets are used on these attachments. Any weld on brackets which adversely affect the structure of the product may invalidate warranty.
- Page 7 1.4 MACHINE CAPABILITIES The Albutt bale handlers are capable of handling (bale sizes in cm - widthxdepth): HANDLER ROUND 80x90 120x90 120x70 80x70 80x50 120x120 CAPACITY (kg) F100 1000 F110 2000 F125 2500 F131 2250 F131FT 2250 F140A 1500 F150A...
- Page 8 Gently place down the bales and when the load is taken by the floor/trailer/other bales, reverse out gently. If the bales begin to move adjust spike position as necessary to prevent dragging. www.albutt.com | 01242 620 252 | keith@albutt.co.uk...
- Page 9 Gently place down the bale and when the load is taken by the floor/trailer/other bales, reverse out gently. If the bale begin to move adjust spike position as necessary to prevent dragging. www.albutt.com | 01242 620 252 | keith@albutt.co.uk...
- Page 10 If the bales begin to move alter the base tine position gently to release them. Do not drop the bales from any height, this may result in personal injury or damage to the bales www.albutt.com | 01242 620 252 | keith@albutt.co.uk...
- Page 11 Do not drop the bales from any height, this may result in personal injury or damage to the bales www.albutt.com | 01242 620 252 | keith@albutt.co.uk...
- Page 12 Regularly check the bolts at the hinge points and tighten if necessary. Regularly lubricate the hydraulic cylinder and hinges using clean grease. Cover the chromed area of the hydraulic cylinder with a layer of grease during prolonged periods of inactivity. www.albutt.com | 01242 620 252 | keith@albutt.co.uk...
- Page 13 2.0 F501 PARTS DRAWING (2012) www.albutt.com | 01242 620 252 | keith@albutt.co.uk...
- Page 14 2.0 F501 PARTS DRAWING (2012) www.albutt.com | 01242 620 252 | keith@albutt.co.uk...
- Page 15 2.1 F650HX PARTS DRAWING (2018) www.albutt.com | 01242 620 252 | keith@albutt.co.uk...
- Page 16 2.2 F125 PARTS DRAWING (2018) www.albutt.com | 01242 620 252 | keith@albutt.co.uk...
- Page 17 2.3 F301 PARTS DRAWING (2017) www.albutt.com | 01242 620 252 | keith@albutt.co.uk...
- Page 18 2.4 F150A PARTS DRAWING www.albutt.com | 01242 620 252 | keith@albutt.co.uk...
- Page 19 2.5 F140A PARTS DRAWING www.albutt.com | 01242 620 252 | keith@albutt.co.uk...
Need help?
Do you have a question about the F155A and is the answer not in the manual?
Questions and answers