Related Manuals for Metz Calea 49TY82
Summarization of Contents
LED-TV Operating Instruction
For TV sets with the type designation „TY”
Specifies the manual's coverage for specific TV models.
Explanation
Hint, note
Indicates informational notes and tips within the manual.
Beware of health risks!
Highlights potential health hazards related to device usage.
Connecting, switching on and off
Power connection
Instructions for connecting the TV set to a power source.
Switching on for the first time
Guides the initial setup process when turning on the TV for the first time.
Antenna connection
Reception type DVB-C, DVB-T/T2 and analogue TV
Describes antenna connection for various digital and analog TV standards.
Reception type DVB-S and DVB-S2
Details antenna connection for satellite reception using normal or tandem setups.
Remote control (RM18)
ON, at program position 1
Button function for turning the TV on or setting the initial program.
OFF, enter stand-by setting
Button function for switching the TV to standby mode.
When set to Play: Rewind
Controls playback for rewinding during media playback.
When set to time shift: Skip backwards -20 seconds
Function for skipping backwards in time shift mode.
Open archive / in archive: Play
Action to open and play content from the archive.
When set to Play: Fast forward
Controls playback for fast forwarding during media playback.
When set to time shift: Skip forwards one minute
Function for skipping forwards in time shift mode.
Start direct recording / EPG direct recording
Initiates direct recording of programs or EPG recorded content.
In TV mode: Start time shift
Activates the time shift function while in TV mode.
In TV mode: Freeze frame
Pauses the current image on screen in TV mode.
When set to Play: Still picture/Pause
Pauses playback or displays a still image during media playback.
When set to Play: press and hold: slow motion
Activates slow motion playback by holding the button.
Stop (when set to Play: Return to archive / when set to time shift: Switch to “Live”)
Stops playback or switches between archive and live view.
Select internal and external signal source (AV devices)
Allows selection of internal or external AV sources for input.
Select HbbTV.
Accesses the Hybrid Broadcast Broadband TV service.
Call up picture settings
Opens the menu for adjusting picture display parameters.
Call up sound settings
Opens the menu for adjusting audio output parameters.
Display date, time info on program.
Shows current date and time information related to the program.
When set to time shift: Display playback position
Shows the current playback position within time shift mode.
F Open "Functions" (function keys)
Accesses a menu for programmable function keys.
Remote control (RM19)
ON, at program position 1
Button function for turning the TV on or setting the initial program.
OFF, enter stand-by setting
Button function for switching the TV to standby mode.
When set to Play: Rewind
Controls playback for rewinding during media playback.
When set to time shift: Skip backwards -20 seconds
Function for skipping backwards in time shift mode.
Open archive / in archive: Play
Action to open and play content from the archive.
When set to Play: Fast forward
Controls playback for fast forwarding during media playback.
When set to time shift: Skip forwards one minute
Function for skipping forwards in time shift mode.
Start direct recording / EPG direct recording
Initiates direct recording of programs or EPG recorded content.
In TV mode: Start time shift
Activates the time shift function while in TV mode.
In TV mode: Freeze frame
Pauses the current image on screen in TV mode.
When set to Play: Still picture/Pause
Pauses playback or displays a still image during media playback.
When set to Play: press and hold: slow motion
Activates slow motion playback by holding the button.
Stop (when set to Play: Return to archive / when set to time shift: Switch to “Live”)
Stops playback or switches between archive and live view.
Select internal and external signal source (AV devices)
Allows selection of internal or external AV sources for input.
Show picture in picture
Activates the picture-in-picture display mode.
Open the menu
Accesses the main menu for TV settings and functions.
F1 . . F3 Function keys
Accesses programmable function keys for quick access.
Setting the language/country
Language selection in the menu
Allows selection of the menu language for all user interface texts.
Setting the country
Configures the TV's basic settings based on the selected country.
Channel search
9.1 Setting the reception type
Configures the TV for different broadcast signal types like DVB-T, DVB-C, DVB-S.
Setting the SAT system, antenna system
Antenna system
Twin SAT, Single cable (single cable distribution SDC).
JESS (EN50607), Unicable (EN50494)
The antenna system with a channel router feeds one cable and is designed to receive the full channel selection.
Tandem (for connections with just one satellite antenna cable)
In the 'Tandem' setting, the two DVB-S receivers are connected to the SAT bridge cable.
Edit favourite list
Block selection
Use the cursor to go to the first programme position of the desired time slot and select it.
Import/export channel list
Export channel list
Insert USB stick. Press button to open the 'Functional overview'.
Import channel list
Press button to open the 'Functional overview'. Select 'Filemanager'.
Programme selection and information
Programme selection
The TV set can administer a maximum of 10000 TV and 3000 radio programme positions.
Programme selection using the TV station list
In TV or Radio mode, press the button to display the channel list.
Search station name
Press the green button to open a virtual keyboard.
Everyday handling
Changing picture settings
The picture settings can be accessed via the green key. The settings box appears.
Volume settings
Use the V+/V– key to change the volume.
Changing the sound settings
The sound settings can be accessed via the yellow key. The settings window appears.
Virtual keyboard
A virtual keyboard appears for some applications. If you want to change the keyboard layout...
Search function
Search function in the TV channel lists
When the TV channel lists are displayed, a virtual keyboard can be opened.
Time settings
Setting the sleep timer
The sleep timer switches the TV set off after a period you set (15 min steps).
Subtitles
Switch subtitles on or off in general
By default, the 'Subtitles' function has to be activated first of all via the menu.
Temporarily displaying subtitles
When 'Subtitle off' is set, it is possible to temporarily display the subtitles.
Picture settings
Picture profile adjustment settings
Picture profiles are a summary of parameters for application-related settings.
Picture profil adjustment settings
Selecting power options
Three different power options can be set in the 'Power options' menu item.
Picture settings for program
Divergent picture settings for this program position
Select the program position whose picture settings you wish to adapt.
PIP - Picture in picture
Picture-in-Picture mode is not available for UHD content.
Picture-in-Picture mode is not available for UHD content.
Accessing Picture-in-Picture (PIP)
Press the PIP button (only on silver remote controls).
Sound settings
General sound settings
The volume can be set globally for all programmes.
Volume
The volume can be set globally for all programmes.
Bluetooth®
Bluetooth® basic settings
Press button to open the 'Functional overview'. Select 'Menu' with the cursor.
Bluetooth® playback over headphones/loudspeakers
In this setting, the TV sound can also be heard over Bluetooth®-headphones/loudspeakers.
Sound settings for program
Volume correction
Broadcasting channels broadcast at different volumes. This volume difference can be adjusted...
Program mute
Program mute
Press button to open the 'Functional overview'. Select 'Menu' with the cursor.
Two-channel selection
In the 'Sound settings, general' menu you can select Channel 1 or Channel in the 'Preset value' context menu...
Audio/language selection
Audio-Description
During films for the blind, the scenes are described in the dialogue intervals.
Switching the loudspeaker on/off
Hi-fi output settings
Press button to open the 'Functional overview'. Select 'Menu' with the cursor.
Video text
Calling up video text
Press the TEXT key. The video text will appear.
Double font size
You can change the font size of the video text using the yellow button.
Video text comfort functions
Press the button when the video text appears to display the comfort functions.
Structure
Press the button to open the comfort functions. Select 'Structure' with the cursor.
Cursor on (cursor page selection)
Press the button to open the comfort functions. Select 'Cursor on' with the cursor.
Search by keyword
It is possible to search video text by keyword. Press the button to open the comfort functions.
Radio mode
DVB radio
During the channel search... DVB radio stations are searched automatically and saved...
The F-button
Programming function
Press the button or the buttons F1, F2 or F3. An overview opens on the screen.
Executing a function
Press the button or the buttons F1, F2 or F3 and then the numeric key for the function...
Setting a favourite function
It is possible to configure preferred functions in the overview.
Start Up
Initial program position
You can define an initial programme position for this TV set.
Start-up screen
Set start-up screen
Insert a USB stick with the personal picture into a USB socket.
Startbild zurücksetzen
Press button to open the 'Function Overview'.
Quick start
Switch on quick-start
Press button to open the 'Functional overview'. Select 'Menu' with the cursor.
Parental control
Blocking selected channels
To block selected channels, you must select them in the 'TV Channel List'.
Activate parental control
Activating Parental Control using the function overview
Press button to open the 'Functional overview'. Select 'Parental control'.
Activating Parental Control using the function button
Programme the F button (for black remote controls) or the F1, F2 or F3 buttons...
AV devices
AV Connecting AV units
AV devices (audio/video) are additional devices which emit picture and/or sound signals.
EPG (Electronic Programme Guide)
EPG Settings
Press the EPG button to open the EPG. Press the green button, select 'Settings'.
EPG channel
In various countries, such as Switzerland, there is a central information channel that supplies all EPG data.
Metz Media System
Media Player
The Media Player enables you to play films, photos and music files from various components in your home network...
HbbTV
HbbTV (Hybrid broadcast broadband TV) is a new industry standard for connecting TVs with the Internet.
Network (LAN or WLAN)
Network configuration – automatic LAN or WLAN configuration
Press button to open the 'Functional overview'. Select 'Menu' with the cursor.
Media Server
Configuring preset values
Press button to open the 'Functional overview'. Select 'Menu' with the cursor.
Hybrid broadcast broadband TV (HbbTV)
HbbTV – set start-up properties
Press button to open the 'Functional overview'. Select 'Menu' with the cursor.
Internet Timer
Activating the Internet Timer
Press the button to open the 'Function Overview'. Select 'Menu' with the cursor.
Cookies
Delete cookies
Press the button to open the 'Function Overview'. Select 'Menu' with the cursor.
Automatically delete cookies
Select 'Data protection' with the cursor in the context menu and press the button.
Manually delete cookies
Select 'Data protection' with the cursor in the context menu and press the button.
Smart TV Internet portal
Open the internet internet portal
Press button to open the 'Functional overview'. Select 'Internet portal'.
The first time you visit the internet internet portal:
Use the cursor to choose the language you want and press the button.
Setting the browser
Use the cursor to select 'All apps' in the left-hand grey column.
Opening interactive TV applications
Use the cursor to select the option you want (films, music, games, etc.).
Opening the Media Player
Using the media player
Operation of the Media Player can vary depending on the media files (audio/photo/video).
Photos – photo overview
In the opened Media Player, select an image from the Image Overview.
Music
Slideshow with music
It is possible to configure a slideshow with music. To do this, your music and photos must be saved in the same folder.
Digital-/USB recording to hard disk
Hard disk instructions
A hard disk drive is very sensitive. The hard disk may fail if it is used improperly or in an unsuitable environment.
Important recordings on the hard disk
The hard disk is not intended to serve as a permanent memory for your recordings.
Installation and handling
Do not subject the TV set to shocks or vibrations, especially if the TV set is in operation.
Format external hard disk
Format hard disk on the TV set:
Press button to open the 'Functional overview'. Select 'Menu' with the cursor.
Settings for the internal/external hard disk
If the HDD is full .
If the hard disk is full, depending on the settings, either no recording will be saved or the oldest recording saved...
Time shift (delayed viewing)
Time shift mode runs permanently or is started by pressing the key (pause).
Speed test
If you want to use a USB memory stick for USB recording, we recommend carrying out a speed test first of all.
Formatting (only for use with external USB storage media)
The external USB storage device should be configured and formatted for PVR.
Delayed television viewing (Time shift)
Parking program
During pause mode, you can also change to a different program position, to watch the news for example.
Recording a broadcast
Direct recording of a program
If you want to record a program that is already running, you program a direct recording.
Configuring a programme as a series timer
Press the button (record) to open the recording window.
Recording plan (Overview of programmed recording timers)
Single recording
Select 'Single recording' or 'Series recording' with the cursor and press the button.
Serial recording
Select 'Serial recording' with the cursor and press the button.
The Recordings archive
Playing programs from the Recordings archive
Press the button to open the 'Recordings archive'. Select the desired recording with the cursor.
Pause playback, Rewind, Fast-Forward
Playback can be paused with the button. The recording pauses on a freeze frame.
Edit recording (marking / cutting)
Marking
Markers can for example be set in a recording in order to mark important or interesting spots.
Cutting
A recording can be provided with cut marks.
Edit recording
Press the blue button in playback mode. The status display appears.
Deleting programs from the Recordings archive
Select 'Delete' with the cursor and press the button.
Select 'Delete' with the cursor and press the button. The following notice appears to confirm...
Delete protections
Activating deletion protection
Press button to open the 'Functional overview'. Select 'Recordings archive'.
Désactiver le protégé
Press button to open the 'Functional overview'. Select 'Recordings archive'.
Continuous playback
Activating endless playback
Press button to open the 'Functional overview'. Select 'Recordings archive'.
Deactivating endless playback
Press button to open the 'Functional overview'. Select 'Recordings archive'.
The “File Manager”
Call “File Manager”
Press button to open the 'Functional overview'. Select 'Filemanager'.
Software update
There are two ways to update your TV set:
a) over the Internet if your TV is connected to the network
First of all, you should check the firmware version of your TV set.
First of all, you should check the firmware version of your TV set.
Range of functions
Setting the range of functions
Press button to open the 'Functional overview'. Select 'Menu' with the cursor.
Operation via the Metz Remote app
Requirements
The TV set must be connected to the home network (wireless router) via a LAN cable...
Download the Metz Remote app
To download and install the Metz Remote app for iPhone, iPod Touch and iPad, you need to open 'iTunes'.
Setting up the TV set to use the app
Operating the TV set via the 'Metz Remote' app on a smartphone requires that your TV be set up.
Operating more than one TV in a single room
Linking a remote control to a TV set
Press button to open the 'Functional overview'. Select 'Menu' with the cursor.
Glossary
ARC (audio return channel)
An audio return channel has been implemented in the HDMI 1.4 version to reduce the cabling effort...
Motion compensation
'Motion compensation, film' improves the picture display for black and white or cinema films.
Vertical picture position
In the case of some wide screen films subtitles are broadcast in the lower black strip.
Picture profile
Eco: Compromise for all applications. Sports: Setting for sports channels...
Code
The settings for parental control are secured with a four-digit numerical code...
DHCP
The Dynamic Host Configuration Protocol permits assignment of the network configuration to clients by a server.
Cleaning the device
Care and cleaning:
Switch off and unplug the device before cleaning. Take care that water or other liquids never gets into the device...
Problem, Possible causes, Remedy
TV set does not respond to remote control
Problem: TV set does not respond to remote control. Possible cause: No direct line of sight contact...
After switching on, the message “Code entry” appears on the screen.
Problem: After switching on, the message 'Code entry' appears on the screen. Possible cause: Parental control was programmed...
The TV set was switched off using the button, but the yellow or blue-red light diode is still on.
Problem: The TV set was switched off using the button, but the yellow or blue-red light diode is still on.
No sound is output on the TV speakers
Problem: No sound is output on the TV speakers. Possible cause: In the 'Sound' menu under 'Sound Settings, general', 'Speaker off' is selected.
No EPG data available or only certain data
Problem: No EPG data available or only certain data. Possible cause: The TV set was unable to collect any data...
Technical data
Mains voltage:
Mains voltage: . . . . . .230 -240 V ˜ 50 Hz
Antenna input:
Antenna input: . . . . .75 Ohm
Channel coverage:
Channel coverage: . .DVB-T, DVB-C, analogue 48-862MHz DVB-S/S2 950-2150MHz
Operating temperature range:
Operating temperature range: +5°C bis +35°C bei 75 % air humidity
In- and output signals supported
HDMI 3840x2160p 60 Hz 3840x2160p 60 Hz...
Special instructions for TV sets with OLED technology
'OLED twin R' televisions are equipped with OLED screen technology.
'OLED twin R' televisions are equipped with OLED screen technology.
Avoid still images over longer time periods.
Avoid still images over longer time periods.
Avoid picture content with a still image character...
Avoid picture content with a still image character (e.g. a static outer frame...
Avoid using presentation mode.
Avoid using presentation mode.
After four hours of operation, the device starts an 'RS compensation cycle'...
After four hours of operation, the device starts an 'RS compensation cycle' as soon as the set is switched to standby mode.
You did not use standby mode the last time the device was switched off.
You did not use standby mode the last time the device was switched off.
After around 600 hours of operation, JB compensation will be performed...
After around 600 hours of operation, JB compensation will be performed as soon as the device is put in standby mode.
Need help?
Do you have a question about the Calea 49TY82 and is the answer not in the manual?
Questions and answers