Haskris OPC Series Operation And Maintenance

Operation and Maintenance
Haskris LX-Series, R-Series, WW-Series, OPC-Series

Section 1: Temperature Control

• Your Haskris will have one of three different types of controller. Use table 1-1 to identify the relevant controller.
• The controller may appear different than examples. Contact Haskris if you are not sure what type you have.
• Adjust supply temperature while under heat load.
• Allow 15-30 minutes for the supply temperature to stabilize after an adjustment.
• Consult a dew point chart to select a supply fluid temperature that will minimize condensation.
• If no heat load is applied, the unit may "over-cool".
Electronic Temperature Controllers
ON/OFF
Cycling Control
Section 1.1
Parametric
Control
Section 1.2
Programmable
Logic Control
Section 1.3
Table 1-1
www.haskris.com
776 North Oaklawn Avenue, Elmhurst, Illinois 60126 USA : +1-847-956-6420 | : +1-847-956-6595
ph fx
1
| : service@haskris.com
email
Copyright © 2020 Haskris REV102920