Related Manuals for B-TEC Starter 02
Summarization of Contents
Important Information and Warnings
Explanation of Symbols
Explains warning and notice symbols used in the manual for safety and operation guidance.
Technical Description and Specifications
Technical Information
Details compressed air connection, operating pressure, acoustic emission, and container specifications.
Item Descriptions and Spare Parts
Lists machine parts with corresponding ordering numbers for replacement.
Pneumatic Plan and Spare Parts
Provides a diagram of the pneumatic system with component part numbers.
Safety Regulations and Compliance
Employer Liability Insurance Regulations
Lists occupational safety regulations (BGV, BGR, BGI) relevant to equipment use.
General Safety Instructions
Provides crucial safety precautions, including who should not operate and protective measures.
Installation Safety Regulations
Details risk zoning and ignition source precautions around the cleaning machine during installation.
Transport and Installation Guide
Installation Site Requirements
Specifies conditions for the installation location, including ventilation, temperature, and flooring.
Machine Installation Steps
Explains how to mount the machine on a wall and assemble the drain hose.
Operating Instructions
Commissioning Procedure
Describes connecting hoses to solvent drums for waste and fresh solvent prior to use.
Operational Procedure
Details how to operate both manual and automatic cleaning cycles, including setting adjustments.
Adjusting Machine Facilities
Explains how to adjust valves controlling solvent jet, brush, and compressed air functions.
Care and Maintenance
Machine Maintenance
Covers cleaning filters, interior walls, drain pan, and recommendations for long-term storage.
Disposal Guidelines
Guides on proper disposal methods for the machine, classifying it as hazardous waste.
Need help?
Do you have a question about the Starter 02 and is the answer not in the manual?
Questions and answers