Related Manuals for Dormakaba 9230-K7
Summarization of Contents
About this document
Validity
Describes the product's validity and version information.
Target Group
Identifies the intended audience for this manual.
Contents and Purpose
Outlines the scope and objectives of the document.
Additional Documentation
Lists other relevant documentation for the system.
Availability of Additional Documentation
Explains how to access supplementary documentation.
Orientation in the Document
Provides guidance on navigating and understanding the document structure.
Instructions
Explains the format and symbols used for instructions.
Abbreviations and Term Definitions
Defines technical terms and abbreviations used in the manual.
Warnings
Details different hazard categories and warning symbols.
Notes
Explains the meaning of note symbols for tips and information.
Basic Safety Instructions
Assembly and Installation
Covers essential safety guidelines for assembling and installing the device.
Service and Maintenance
Provides safety precautions for servicing and maintaining the product.
Accessories and Spare Parts
Specifies requirements for using approved accessories and spare parts.
ESD Prevention Measures
Details measures to prevent damage from electrostatic discharge.
Environmental Protection
Guidelines for proper disposal and environmental considerations.
Data Protection and IT Security
Addresses security risks and recommended measures for data protection.
Product Description
Overview
General introduction to the access control terminal and its system.
Device Versions
Details the different hardware variants of the access manager.
Specification
Outlines the system environment, memory, and installation specifications.
Technical Data
Provides detailed technical specifications including power, interfaces, and dimensions.
Power Supply
Details the power supply options for the device.
Data Retention in Case of Power Failure
Explains how data is retained during power interruptions.
Output Voltages
Specifies the available output voltages and their power ratings.
Frequency Bands and Transmission Power
Details the RFID/NFC frequency and transmission power.
Interfaces
Describes the communication interfaces like Ethernet, RS-232, and RS-485.
Terminals
Provides specifications for the device's connection terminals.
Inputs
Details the device's input specifications and connections.
Outputs
Details the device's output specifications and connections.
Ambient Conditions
Specifies the operating and storage environment conditions.
Dimensions/Weight
Provides the physical dimensions and weight of the device.
Conformity
Lists the regulatory compliance standards and directives met by the product.
Open Source Information
Information regarding open source licenses used in the firmware.
Identification
Describes the information found on the device's identification label.
Included in Supplied Package
Lists all items included in the product packaging.
Accessories
Overview of available accessories for the access manager.
Detection Units
Details specific detection unit accessories.
Construction and Function
Light Emitting Diodes
Explains the function and meaning of the device's status LEDs.
Device Status
Describes how the status LED indicates the device's operational state.
Opening the Housing
Provides instructions for safely opening the device housing.
Tamper Switch
Details the tamper switches and their function for security.
Reading Behaviour
Explains how the device interacts with media and readers.
Behaviour with Two Registration Units
Describes how the device operates with two connected registration units.
Behaviour of Readers Installed Next to Each Other
Details how adjacent readers may influence each other.
Behaviour When Several Media are Present (Anti-collision)
Explains how the device handles multiple media in the read field.
Access Control with MATRIX
Describes the device's role in the MATRIX access control system.
MRD Principle
Explains the operational principle of the MRD access control system.
Wiegand Principle
Explains the operational principle of the Wiegand access control system.
Mobile Access System Overview
Provides an overview of the mobile access system functionality.
System Requirements
Lists the system requirements for the access manager firmware and software.
Mobile Access System Requirement
Details specific system requirements for mobile access functionality.
Installation
Installation Requirements
General requirements and guidelines for proper device installation.
General
Basic principles to follow for an accurate installation.
Installation Site
Defines suitable locations and environmental conditions for installation.
Connections
Describes the necessary site preparations for device connections.
Cable Entry
Instructions on how to route cables into the device.
Installation Lines
General guidelines and requirements for installing various cable types.
General Requirements
Key requirements for cable installation, including protection and malfunction avoidance.
Ethernet
Specifications for Ethernet network cabling.
Lines to RS-485 Devices
Details wiring requirements and cable lengths for RS-485 devices.
Line to Door Opener, Key, and Contacts
Cable specifications for connecting door components.
Coaxial Cables to Registration Units
Specifications for coaxial cables used with registration units.
Line to the Wiegand Reader
Specifications for cabling to the Wiegand reader.
Wall Mounting
Step-by-step instructions for mounting the device on a wall.
Routing of Lines
Guidance on routing internal cables using cable ties.
Connections
Overview of the device's connection ports and interfaces.
Ethernet Connection
Steps for connecting the device via Ethernet, including power supply.
Overview of Connection Terminals
Diagrams showing the layout and function of device connection terminals.
Connecting Registration Units
Instructions for connecting registration units to the device.
Connection to RS-485 Devices
Details on wiring and connecting RS-485 compatible devices.
Signaling (RS-485)
Explains the meaning of the RS-485 interface LEDs.
Connecting the Wiegand Reader
Instructions for connecting Wiegand readers to the device.
Inputs
Details the device's input terminal connections and signaling.
Outputs
Details the device's output terminal connections and signaling.
Fastening the Cover
Steps for securing the device's housing cover after installation.
Commissioning
Network Parameters
Configuration of network parameters for device operation.
MAC Address of the Device
Information on locating and using the device's MAC address.
Change Network Parameters with 'MATRIX Device Scanner'
Using the scanner tool to modify network settings.
Configuration
Steps required to configure the device using system software.
Initialise the Device for Mobile Access
Procedure for setting up mobile access functionality.
Additional Steps for Legic Media Technology
Advanced procedures for Legic media technology.
Grant Read/Write Authorisation
Process for granting read and write permissions via a registration unit.
Withdrawing Read/Write Authorisation
Procedure for revoking read and write permissions.
Withdrawing All Write Access
Steps to revoke all write access permissions from the device.
Withdrawing Individual Write Access
Steps to revoke specific individual write access permissions.
Maintenance
Restart Reader
Instructions on how to restart the device when it becomes unresponsive.
Reset the Device to Factory Settings
Procedure for restoring the device to its original factory configuration.
Decommissioning
Disassembly
Steps for safely removing and dismantling the device.
Packaging and Return
Complete Devices
Guidelines for packaging complete devices for transport or return.
Electronic Component Assemblies
Packaging instructions for ESD-sensitive electronic parts.
Labelling
Information required for labelling packages for returns processing.
Need help?
Do you have a question about the 9230-K7 and is the answer not in the manual?
Questions and answers