McAfee MSA09EMB1RAA - Site Advisor Plus 2009 Product Manual page 18

Configuring Policies
Default policy settings
Policy
Enable/Disable
Enforcement Messaging
General
Prohibit List
Event Tracking
Rating Actions
18 McAfee SiteAdvisor Enterprise Plus 3.0 Product Guide
Default policy settings
After a list is created, default settings for the advanced
options are:
• Track events: Selected.
• Block phishing pages: Selected.
• File downloads:
• Yellow: Warn
• Red: Block
• Unrated: Allow
• Block sites with exploits: Selected.
• Give this Authorize list precedence: Not
selected.
• SiteAdvisor policy enforcment — Enable:
Selected. The client software is enabled on all
systems managed with this policy.
• SiteAdvisor menu option — Enable: Not selected.
The client software cannot be disabled from the
managed system.
No custom messages or logos are displayed to users
when they attempt to access allowed, warned, or blocked
sites and site resources.
• No proxy settings are defined.
• Observe mode — Enable: Not selected. Options
configured for blocking or warning are enforced.
• Control Panel Option — Enable: Not selected.
to have SiteAdvisor Enterprise Plus appear in the
client system Add or Remove Programs control panel
is not selected.
No Prohibit list is set up.
• Domains and downloads — Track: Selected.
• Include traffic to internal sites: Set to Never.
• Track content categories for allowed green
sites: Selected. Only available if the Web Filtering
for Endpoint extension is installed.
• Page views and downloads — Track: Not
selected. Only available if the Web Filtering for
Endpoint extension is installed.
• Site navigation rating actions:
• Yellow: Warn
• Red: Block
• Unrated: Allow
• Page-level rating actions: Block phishing pages
selected. Phishing pages detected on allowed sites
are blocked.