HTW LION -SWP-O-190LIO Owners And Installation Manual

HTW LION -SWP-O-190LIO Owners And Installation Manual

Swimming pool heat pump

Advertisement

OWNER'S AND
INSTALLATION MANUAL
SWIMMING POOL HEAT PUMP
LION
HTW-SWP-O-070LIO | HTW-SWP-O-110LIO
HTW-SWP-O-160LIO | HTW-SWP-O-190LIO
Thanks for choosing our product.
Please, read carefully this manual
before using the product.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LION HTW-SWP-O-190LIO and is the answer not in the manual?

Questions and answers

Summarization of Contents

2. SPECIFICATION
2.1 Performance Data of Swimming Pool Heat Pump Unit
Detailed performance metrics for various models, including capacity, power input, and current.
2.2 Dimensions for Swimming Pool Heat Pump Unit
Physical dimensions and layout drawings for different heat pump models.
3. INSTALLATION AND CONNECTION
3.1 Installation illustration
Diagram showing the typical plumbing connections for the swimming pool heat pump system.
3.2 Swimming Pool Heat Pumps Location
Guidelines for selecting an optimal outdoor location for the heat pump unit.
3.3 How Close to Your Pool?
Recommendations on the optimal distance for piping between the heat pump and the pool.
3.4 Swimming Pool Heat Pumps Plumbing
Instructions for connecting the heat pump to the pool's water circulation system.
3.5 Swimming Pool Heat Pumps Electrical Wiring
Guidance on the safe and correct electrical connections for the heat pump unit.
3.6 Initial Start-up of the Unit
Step-by-step procedure for the initial power-up and operation of the heat pump.
4. USE AND OPERATION INSTRUCTION
4.1 Interface display
Explanation of the symbols and readouts shown on the heat pump's control panel display.
4.2 Key and icon function instruction
Description of the functions associated with each button and icon on the controller.
4.3 Startup & shutdown
Procedures for safely turning the heat pump unit on and off.
4.4 Switch Mode
How to change between heating, cooling, and automatic operating modes.
4.5 Temperature setting
Instructions on how to set and adjust the desired pool water temperature.
4.6 Clock setting
Guide to setting the internal clock and timer functions for the heat pump.
4.7 Mute setting
Instructions for activating or deactivating the unit's silent operation mode.
4.8 Keyboard lock
How to lock the control panel to prevent accidental changes to settings.
4.9 Fault interface
How the unit displays error codes and information when a fault occurs.
4.10 Parameter list and breakdown table
Lists of adjustable parameters and a table of faults with reasons and solutions.
6. APPENDIX
6.1 Controller interface diagram and definition
Detailed diagram of the controller board and definitions of its input/output terminals.
6.2 Cable specification
Recommended cable types, sizes, and protection devices for single and three-phase units.

Table of Contents