Advertisement
Advertisement
Table of Contents
Related Manuals for Thermaltronics TMT-2000S
Summarization of Contents
Features of the Desolder Kit
Desolder Gun Features
Details the construction and components of the desolder gun, including grip, trigger, and airhose.
Workstand Features
Describes the durable phenolic material and unique sure lock iron holder of the workstand.
Tip Selection Guide
Desolder Tip Geometry Selection
Guidance on selecting a desolder tip with an inner diameter larger than the lead diameter.
Desolder Tip Temperature Series
Explanation of temperature series (60, 75, 80) for different application needs.
Unpacking, Assembly, and Operation
Assembly and Operation Instructions
Step-by-step guide for assembling the desolder gun and connecting it to the air supply.
Temperature Calibration Information
Details on the 'Curie Heat Technology' which requires no manual temperature calibration.
Maintenance Procedures
Cleaning the Gun Chamber
Instructions for opening the gun chamber, replacing the chamber liner and filter wool.
Replacing the Venturi
Procedure for removing and replacing the venturi using a slot type screwdriver.
Replacing the Cartridge Seal
Steps for removing the desolder tip and installing a new cartridge seal.
Ordering Guide for DS-KIT
Parts for Order
List of available part numbers for desolder guns, cables, hoses, and accessories.
Need help?
Do you have a question about the TMT-2000S and is the answer not in the manual?
Questions and answers