Table of Contents
Advertisement
Quick Links
DIMETRA
DIMETRA X Core
DIMETRA Express
DIMETRA IP Scalable (DIPS)
DIMETRA IP Compact (DIPC)/Scalable DIMETRA IP (SDIP)
DIMETRA IP Micro/DIMETRA IP LiTE
MTS LiTE, MTS 2 and
MTS 4 Installation,
Configuration and Basic
Service Manual
TBD 2020
2020 Motorola Solutions, Inc. All rights reserved
©
™
*6802800U74*
Advertisement
Table of Contents
Troubleshooting
Related Manuals for Motorola MTS 2
Summarization of Contents
MTS Overview
Base Radio Architecture Comparison
Compares BR-Arch-1 and BR-Arch-2 boot orders and functionalities.
MTS Platform Description
Describes MTS functions, versions, and module configurations.
MTS LiTE Components
Lists and describes the components of the MTS LiTE cabinet.
MTS 2 Components
Lists and describes the components of the MTS 2 cabinet.
MTS 4 Components
Lists and describes the components of the MTS 4 cabinet.
Expansion Cabinet Components
Lists and describes the components of the Expansion Cabinet.
MTS Modules
Details the various modules that comprise an MTS system.
RF Distribution System
Explains the RFDS module and its subcomponents.
Site Controller Module
Explains the Site Controller's role in managing resources and GPS.
XHUB
Describes the eXpansion HUB as a switching and interface module.
Base Radio Module
Details the Base Radio's role in digital communication and its subcomponents.
Power Supply Unit
Explains the PSU's function in providing power and its configurations.
Cooling Fans
Describes the function of fan modules in managing cabinet temperature.
General Safety
General Safety Precautions
Provides essential safety warnings and precautions for working with MTS equipment.
Mains Safety Precautions
Details safety information specific to mains power when operating MTS.
Battery Safety Precautions
Provides safety information related to working with MTS batteries.
Site Preparation
Site Planning
Covers planning to prevent interference and optimize performance by managing site layouts.
Site Survey
Outlines steps for inspecting and surveying a site before ordering equipment.
Site Selection Considerations
Provides recommendations for selecting a suitable site, including dimensions and temperature.
Cabinets Installation Considerations
Details considerations for installing MTS cabinets, including clearances and mounting.
Electrical Requirements
Details electrical requirements for MTS installation, including power sources and wiring.
Grounding Requirements
Explains grounding methods for lightning protection and equipment safety.
Hardware Installation
Installation Overview
Provides an overview of MTS hardware installation steps and mounting options.
Installation Prerequisites
Lists essential steps and considerations before performing installation tasks.
Cabinet Transportation
Details procedures and safety considerations for moving MTS cabinets.
Cabinet Installation
Covers methods for installing MTS cabinets, including wall or floor fixing.
Electrical Connections
Covers connecting electrical cables for power, alarms, site links, and GPS.
RF Antenna Connections
Explains how to connect RF antennas to the junction panel or cabinet top.
Performing a Final Check-Out after Installation
Final procedures to ensure proper operation after MTS installation.
Recommended Installation Tools, Parts, and Test Equipment
Lists recommended tools, parts, and test equipment for installation.
Interconnection and Internal Cabling
AC/DC Power Cabling
Covers power connections between Junction Panel and PSU.
User Alarms/Controls, X.21, RGPS, and GPS Cabling
Covers cabling for alarms, X.21, RGPS, and GPS.
E1 and Ethernet Cabling
Covers cabling for E1 and Ethernet interfaces.
Ethernet Site Link Cabling
Details Ethernet Site Link connections and retrofit kits.
RF Cabling
Covers cable connections among antenna connectors, RFDS, and Base Radios.
CAN Bus Cabling
Covers CAN Bus cabling between MTS 4 Prime Cabinet and Expansion Cabinet.
Configuration and Testing
Setup and Testing Overview
Overviews setup and test procedures for MTS functionality and module isolation.
Preparing for Configuration and Testing
Outlines steps to take before proceeding with configuration and testing.
MMI Commands and MTS Modes of Operation
Explains MMI commands and different modes of operation for Site Controller and Base Radio.
Test Equipment
Lists recommended test equipment for cabinet procedures.
Service Cable and Connector Box Description
Describes the service cable and connector box used for MMI commands.
CAN Bus Configuration
Explains CAN Bus interconnectivity and configuration through MMI commands.
Configuring and Verifying the Site Controller
Specifies steps to verify Site Controller operation.
Configuring and Verifying the Base Radio
Outlines procedures to ensure the Base Radio is operational.
Station Verification Procedures
Covers methods to verify transmit and receive operations of Base Radio.
Radio Frequency Distribution System
RFDS Theory of Operation
Explains the RFDS module and its subcomponents.
MTS LiTE and MTS 2 RFDS
Describes the RFDS in MTS LiTE and MTS 2.
MTS 4 RFDS
Describes the high-power RFDS for MTS 4.
Site Controller
Site Controller – Theory of Operation
Explains the Site Controller's role in managing resources and GPS.
Site Controller – Indicators, Switches, and Connectors
Details the indicators, switches, and connectors of the Site Controller.
Site Controller Rear Panel
Provides information about the rear panel connectors of the Site Controller.
Site Controller CAN Bus
Explains the CAN Bus functionality for Site Controller.
Site Controller – GPS Module
Explains the function of the GPS module in the Site Controller.
Site Controller – Lithium Battery
Covers procedures for checking and replacing the lithium battery.
XHUB Controller
XHUB Controller – Theory of Operation
Explains the XHUB Controller's function and modes of operation.
XHUB Controller – Indicators, Switches, and Connectors
Details the indicators, switches, and connectors of the XHUB Controller.
XHUB Controller – Rear Panel
Provides information about the rear panel connectors of the XHUB Controller.
Replacing the XHUB Controller
Provides procedures for replacing the XHUB Controller.
Base Radio
Base Radio – Overview
Provides a general overview of the Base Radio.
Base Radio – Theory of Operation
Explains the components and operation of the Base Radio.
Base Radio – Indicators and Connectors
Details the indicators and connectors on the Base Radio front panel.
Replacing the Base Radio
Provides procedures for replacing the Base Radio module.
Power Supply Unit
Power Supply Unit (PSU) – Theory of Operation
Explains the PSU's function, modes of operation, and capabilities.
Fans
Describes the PSU's supply of fans and their control.
Power Supply Unit (PSU) Indicators, Switches, and Connectors
Shows the positions of PSU indicators, switches, and connectors.
Replacing the Power Supply Unit (PSU)
Provides procedures for replacing the Power Supply Unit.
Cooling Fans
Cooling Fans Overview
Describes the function of fan modules in managing cabinet temperature.
Cooling Fans Theory of Operation
Explains how fan speed is controlled based on temperature and CAN Bus.
Cooling
Discusses natural and forced air cooling methods.
Replacing the Cooling Fans
Provides procedures for replacing cooling fans.
MTS Troubleshooting
Site Controller Troubleshooting
Provides fault indications and corrective actions for the Site Controller.
Base Radio / RFDS / Miscellaneous Troubleshooting
Covers troubleshooting for Base Radio, RFDS, and miscellaneous issues.
Technical Specifications
Restriction of Hazardous Substances Compliance
Declares compliance with EU and India RoHS directives.
Environmental and Standards Specifications
Presents Environmental and Standards Specifications.
Cabinet and Module Specifications
Includes cabinet dimensions and technical specs for modules.
RF Specifications
Details RF specifications including frequency, bandwidth, and duplex spacing.
Transmitter Specifications
Lists TETRA and TEDS transmitter specifications.
Receiver Specifications
Lists receiver specifications for TETRA and TEDS.
Expansion Options
Additional Base Radio for MTS 2
Describes adding an additional Base Radio to MTS 2.
Configuration
Details parameters for configuring added Base Radios and Site Controllers.
Additional Module Cage for MTS 4
Describes complementing MTS 4 with an additional module cage.
Redundant Site Controller
Explains how to add a redundant Site Controller to MTS 4.
Expansion from Two-Channel to Four-Channel Cavity Combiner
Describes expanding from two-channel to four-channel Cavity Combiner.
Expansion from MTS 2 to MTS 4 Cabinet
Describes expanding from MTS 2 to MTS 4 cabinet.
Redundant XHUB Controller
Explains adding a redundant XHUB Controller to MTS 4 Expansion Cabinet.
MTS 4 Outdoor Enclosure
MTS 4 Outdoor Enclosure
Describes the MTS 4 outdoor enclosure design and features.
Field Replaceable Units (FRUs)
Field Replaceable Units for MTS LiTE
Lists available FRUs for MTS LiTE.
Field Replaceable Units for MTS 2
Lists available FRUs for MTS 2.
Field Replaceable Units for MTS 4
Lists available FRUs for MTS 4.
Surge Arrestors and Suppliers
Lists types of surge arrestors and their suppliers.
Planned Maintenance Inspection (PMI)
Planned Maintenance Inspection (PMI)
Provides advice for recommended Planned Maintenance Inspections (PMI).
Static Precautions and ESD Strap
Static Sensitive Precautions
Outlines precautions for handling static-sensitive modules to avoid damage.
ESD Wrist Strap Safety Precautions
Details safety precautions for using ESD wrist straps.
Assembling the GNSS Antenna
Assembling the GNSS Antenna
Procedure to assemble a GNSS antenna.
TETRA/DIMETRA Acronyms
TETRA/DIMETRA Acronyms
Explains acronyms used in the manual.
Need help?
Do you have a question about the MTS 2 and is the answer not in the manual?
Questions and answers