Table of Contents
Advertisement
Campa Ultimate and Select
For use with Campa Ultimate and Campa Select panel heaters with models:
Narrow Horizontal
XCMEP09H XCMEP12H
Medium Horizontal
XCMUP08H XCMUP10H XCMUP13H XCMUP15H XCMUP20H
XCMSP10H XCMSP13H XCMSP15H XCMSP20H
Medium Vertical
XCMUP10V XCMUP13V XCMUP15V XCMUP20V
XCMSP10V
Narrow Vertical
XCMEP08V
XCMEP11V
XCSEP11V
Note:
These model numbers are followed by 4 letters, designating the colour of the panel heater.
Please refer to Model Numbers – Colour Distinction on page 2 for colour definitions
Installation and Operating
Instructions
XCMSP15V
XCMSP20V
XCMEP16V
XCMAP16V (Corner)
XCSEP16V
Advertisement
Table of Contents
Related Manuals for Campa Select Series
Summarization of Contents
INSTALLING YOUR PANEL HEATER
Positioning Requirements
Details minimum clearances from walls, floor, and furniture for safe installation.
Wall Mounting Procedure
Outlines steps for securely attaching the heater's mounting bracket to the wall.
ELECTRICAL CONNECTION
Connection Methods and Safety
Covers plug connection, direct wiring, cord replacement, and prohibited connections.
USING YOUR HEATER FOR THE FIRST TIME
Initial Operation and Smells
Guides on initial operation, safe use, and expected initial burning smell.
IMPORTANT INFORMATION
Operational Guidelines and Warnings
Covers programmer cover use, obstruction warnings, and correct operating position.
MAINTENANCE
Cleaning and Dust Removal
Provides instructions for safe cleaning and periodic maintenance to ensure optimal performance.
WARRANTY INFORMATION
Claim Process and Conditions
Details warranty validation, claims procedure, and consumer rights for faulty products.
OPERATING THE CAMPA THERMOSTAT CONTROL
Thermostat Display and Controls
Identifies all buttons, indicators, and the display on the thermostat control unit.
Normal Operation Mode
Guides on switching on, setting temperature, and selecting operating modes like Background, Eco, and Frost Prevention.
Advanced Options and Mode Selection
Explains how to access advanced settings and select specific operational modes like Background, Eco, and Frost Prevention.
Locking and Unlocking Controls
Describes how to lock/unlock the thermostat and adjust parameters like screen backlight and temperature display.
THERMOSTAT ADJUSTMENTS
Factory Reset Procedure
Instructions to restore thermostat settings to factory defaults using specific button combinations.
Re-aligning Thermostat and Thermometer
Details how to correct discrepancies between the thermostat display and an external thermometer.
PROGRAMMER CONTROLLED OPERATION
Auto Mode and Timers
Explains the Auto Mode and refers users to Noirot for programmable timer information.
Need help?
Do you have a question about the Select Series and is the answer not in the manual?
Questions and answers