Related Manuals for Jetta SHOWER BASES
Summarization of Contents
Safety Instructions
Operation Safety
Safety guidelines for bath operation, including supervision, intended use, and water temperature limits.
Electrical Safety
Instructions for safe electrical connections, GFCI requirements, and grounding for bath units.
User Maintenance and Cleaning
Cleaning Procedures
Guidance on cleaning bath surfaces, fittings, and recommended cleaning agents.
Flushing Procedure
Step-by-step instructions for flushing whirlpool or air systems to maintain sanitation.
Repair Information
Contact information and guidance for addressing any problems or issues with the bathtub.
General Operation Instructions
Whirlpool Bath Operation
Instructions for filling, operating jets, and emptying whirlpool baths.
Air Bath Operation
Instructions for filling, operating the blower, and managing air bath features.
Specific Jet Operations
Directional Body Jets
How to adjust directional body jet pressure, direction, remove, and install.
Rotating Back Jets
Operation of rotating back jets for Designer and Elite series tubs.
Optional Air Bath Feature
Air Bath Controls
Explanation of the 4-button control for air bath blower, light, and speed modes.
Bath Control Installation
Instructions for installing the air bath control panel and associated components.
Affinity Bath Keypad Control
3 Button Air Bath Controller
Controls for Affinity 3-button air bath: ON/OFF, modes, speed, and light.
4 Button Whirl/Air Combo Controller
Controls for Affinity 4-button combo bath: ON/OFF, modes, speed, and light.
LED Messages and System Reset
Interpreting LED error codes and performing a system reset for bath controls.
Affinity Bath Control Installation
Instructions for installing the control panel and associated components for Affinity baths.
Various Operation Instructions
Walk-In Bath Operation
Safety and operational steps specific to using Jetta walk-in baths.
Whirlpool Bath Operation Reference
References specific operating instructions for whirlpool baths.
Air Bath Operation Reference
References specific operating instructions for air baths.
ActiveDrain System Operation
Description of the pump-assisted drain system for walk-in tubs.
Installation Instructions
Receiving and Inspection
Procedures for inspecting the bath upon receipt for damage and verifying the order.
Electrical Installation Requirements
Guidelines for electrical connections, GFCI, grounding, and wiring during installation.
Water Testing Procedure
Instructions for water testing the unit to check for leaks and ensure watertight fittings.
General Rough-In Guidelines
Guidelines for site preparation and fitting the tub base during rough-in.
Freestanding Rough-In
Specific rough-in instructions for freestanding baths, including site preparation.
Site Preparation
Clearing the site, checking floor level and capacity, and ensuring space for plumbing.
Protective Foam Packaging
Instructions for removing protective foam packaging from the bath feet.
Free Standing Bath Installation Steps
Detailed step-by-step guide for installing one-piece free-standing bathtubs.
Leveling Instructions
Steps to properly level the bathtub using adjustable feet after installation.
System Test
Final system tests after installation, checking plumbing and hydro-massage systems.
Walk-In Baths Installation
Setting the bathtub, plumbing connections, and waste/vent system for walk-in baths.
Waste & Vent System
Recommendations for optimizing drain performance with specific plumbing configurations.
Extension Panel Installation
Instructions for installing extension panels to increase bathtub length.
Need help?
Do you have a question about the SHOWER BASES and is the answer not in the manual?
Questions and answers