Jetta ADVANTAGE Owner's Manual
Hide thumbs
Also See for ADVANTAGE:
- Installation instructions manual (20 pages) ,
- Owner's manual & installation manual (8 pages)
Related Manuals for Jetta ADVANTAGE
Summary of Contents for Jetta ADVANTAGE
- Page 1 SAVE FOR HOMEOWNER OWNERS MANUAL FOR ALL LINES AND MODELS ADVANTAGE | SHOWER BASES CLASSIC | DESIGNER | ELITE AFFINITY | COSMO | WALK-IN (800) 288-7771 | WWW.JETTACORP.COM...
- Page 2 THANK YOU WE’RE THRILLED YOU CHOSE A JETTA BATHTUB! For more than 36 years, Jetta’s emphasis on delivering quality products with superior customer service has made us a trusted industry leader. Take comfort in our expertise in hydrotherapy systems which is backed by our Stay Hot Guarantee.
-
Page 3: Table Of Contents
Table of Contents SAFETY INSTRUCTIONS USER MAINTENANCE INSTRUCTIONS & CLEANING ADVANTAGE SERIES AND RAIN COLLECTION: OPERATION INSTRUCTIONS LIMITED FACTORY WARRANTY CLASSIC, DESIGNER, ELITE, AFFINITY SERIES AND COSMO COLLECTION OPERATION INSTRUCTIONS LIMITED FACTORY WARRANTY WALK-IN BATHS OPERATION INSTRUCTIONS LIMITED FACTORY WARRANTY TROUBLE SHOOTING WARRANTY REGISTRATION ©... -
Page 4: Safety Instructions
Install to permit access for servicing (for built-in and custom units). Installer / Owners bear all responsibility to comply with all state and local codes when installing this product. © 2017 Jetta Corporation All rights reserved. REV 01/2017 WWW.JETTACORP.COM... -
Page 5: User Maintenance Instructions & Cleaning
Repairs of any kind, if necessary, should be done by qualified acrylic experts. Proper installation and maintenance will ensure years of service and make you proud to own a Jetta Corporation bathtub. It is recommended that your whirlpool or air system be flushed twice per month. More frequent service may be required depending on usage. -
Page 6: Operation Instructions
It is recommended that the user momentarily turn on the air bath feature to activate the purge/dry cycle anytime the bath is used. © 2017 Jetta Corporation All rights reserved. REV 01/2017 WWW.JETTACORP.COM... - Page 7 © 2017 Jetta Corporation All rights reserved. REV 01/2017 WWW.JETTACORP.COM 1(800) 288-7771...
- Page 8 When bathing is complete, the pump must be turned off and the bath emptied. Adjust the inner nozzle portion of all the jets in a downward position while emptying the bath. This allows the bath to drain properly. © 2016 Jetta Corporation All rights reserved. REV 08/2016 WWW.JETTACORP.COM...
- Page 9 Press and hold the two top buttons simultaneously for 10 seconds to turn off all equipment. Continue to hold the two top buttons 10 seconds longer to restart the system. © 2017 Jetta Corporation All rights reserved. REV 01/2017 WWW.JETTACORP.COM...
- Page 10 Install the power cord into the wall only after all connections have been made, which include: bath control panel and cables, LED light and cables, and the water detect cable (if equipped). © 2017 Jetta Corporation All rights reserved. REV 01/2017 WWW.JETTACORP.COM...
- Page 11 Purge Cycle will begin. When the Purge Cycle ends, all equipment turns off. OPTIONAL HEATED QUIET-FLO BLOWER Anytime the blower turns on, the heater turns on with it. © 2017 Jetta Corporation All rights reserved. REV 01/2017 WWW.JETTACORP.COM 1(800) 288-7771...
- Page 12 Install the power cord into the wall only after all connections have been made, which include: bath control panel and cables, LED light and cables, and the water detect cable (if equipped). © 2017 Jetta Corporation All rights reserved. REV 01/2017 WWW.JETTACORP.COM...
- Page 13 Warranty Service: In order to make a claim under this warranty, the original consumer / purchaser must notify Jetta Corporation in writing no later than fifteen (15) days from occurrence, and must be within the expressed warranty period(s). Please provide a description of the problem and serial number of bath or proof of purchase.
-
Page 14: Operation Instructions
DESCRIPTION OF OPERATION 1. The Jetta ActiveDrain is a pump assisted drain system that significantly reduces the drain time on a walk-in tub so that the bather does not remain seated in the tub for an extended period while the tub drains. - Page 15 Fax : (405) 348-9745 With the issuance of this warranty, Jetta Corporation stipulates, and the purchasers agrees, that in the event of litigation is instituted as a result of this limit warranty, said litigation will be controlled by the applicable laws of the State of Oklahoma. The buyer and seller both agree that the appropriate forum and venue for any such litigation will be in Oklahoma County, State of Oklahoma.
- Page 16 To reduce the whirl pattern, use your finger to adjust the center of the jet nozzle to the center of the jet body. To increase the whirl pattern, move the jet nozzle to the outer ring of the jet body. Please note that our Classic, Walk-In, Advantage and Affinity lines do not have rotational jets.
- Page 17 ROLL OUT THE NEXT LEVEL OF RELAXATION ROLL-UP GEL PILLOW 01-88-0020 • Versatile design for neck or lumbar support • Molded silicone gel • Approximate size: 16” x 10 1/2 “ • Available in Aqua Blue CONTOURED DELUXE CONTOURED SILICONE GEL NECK PILLOW NECK PILLOW NECK PILLOW...
- Page 18 WARRANTY ACTIVATION To activate your warranty, go to www.jettacorp.com/warranty.html or call (800) 288-7771 and use this lot number: PLACE STICKER HERE (800) 288-7771 | WWW.JETTACORP.COM...
- Page 19 INSTALLATION INSTRUCTIONS Receiving: Immediately upon receiving your Jetta bath, inspect it thoroughly for freight damage. If damage is found, please note on bill of lading and contact JETTA Corporation immediately. The surface should be protected at all times to prevent scratches.
- Page 20 Rough-In: Test fit the tub, and verify dimensions. Your Jetta bath should be installed in a bedding compound, preferably a mortar mix or thin set, which should be distributed under the base to provide maximum support and even weight distribution. Do not use foam, sand or drywall mud.
- Page 21 INSTALLATION OF THE BATHTUB IF THERE IS A FAILURE TO FOLLOW THE MANUFACTURERS RECOMMENDED PRE-INSTALLATION AND INSTALLATION PROCEDURES, FAILURE TO FOLLOW THE MANUFACTURER’S RECOMMENDATIONS COULD RESULT IN THE WARRANTY BEING VOIDED. ©2017 Jetta Corporation All rights reserved. REV 01/2017 www.jettacorp.com...
- Page 22 Protective Foam Packaging: The adjustable feet are protected with foam packaging around each foot to ensure the quality of the bathtubs during transportation. Remove foam protectors prior to installation. ©2017 Jetta Corporation All rights reserved. REV 01/2017 www.jettacorp.com...
- Page 23 Step 14: If necessary, add silicone to the location of the pieces of wood, clean surplus and erase the trace marks on the ground. • Step 15: Leave the bathtub in this position for at least 24 hours before use. • Step 16: Water test the bathtub for leaks. ©2017 Jetta Corporation All rights reserved. REV 01/2017 www.jettacorp.com...
-
Page 24: Walk-In Baths
3. Turn the pump and or blower on and let run for at least 30 minutes. Check for leaks while the system/sys-tems are running and again after you turn them off. Check by hand where visual verification is not possible. ©2017 Jetta Corporation All rights reserved. REV 01/2017... - Page 25 2” trap arm with a 2” ‘P’ trap and 1 ½” bushing. If this is not possible, replace the existing 1 ½” trap arm and ‘P’ trap. If neither of the above options is possible, it is critical to ‘Roto Rooter’ or snake out the ‘P’ Trap and trap arm for at least 10’-0” from the ‘P’ trap. ©2017 Jetta Corporation All rights reserved. REV 01/2017 www.jettacorp.com...
Need help?
Do you have a question about the ADVANTAGE and is the answer not in the manual?
Questions and answers