Electrolux E42BS75ETT - 42" - Refrigerator Owner's Manual And Installation Instructions page 5

About the temperaturecontrols.
ElectroluxUSA.com
P
--_l ] l
11
The temperature controls are preset in the factory at 37°F for the
refrigerator compartment and O°F for the freezer compartment. Allow
24 hours for the temperature to stabilize to the preset recommended
settings.
The actual temperature may vary slightly from the set temperature
based on usage and operating environment.
NOTE: The refrigerator is shipped with protective film covering the
temperature controls, if this film was not removed during installation,
remove it now.
To change the teinperature, press and release the
up or drawn arrow button.
To
change tile
temperature, tap either tile up alTOW for wariner
temperatures or the down al'row for colder
temperatures until the desh'ed temperature is
displayed. Refl'igerator teinperatures call be
adjusted between 34 °F and 46°F alld the fl'eezer
teinperatures call be adjusted between -6 °F alld +
6°F.
Once tile desh'ed teinperature has been set,
the temperature display will clear after 60 seconds.
To display the teinperature, the Disp romp button
inay be tapped.
Several adjustinents Inay be required. Each thne you
adjust controls, allow 24 hours for the refl'igerator to
reach the teinperature you have set.
Performance A ir FlowSystem
Tile Perfonnallce AipFlow
SysteIn is
designed to
inaxiinize temperature control in the refl'igerator
and fl'eezer compartments. This unique special
feature consists of the Air Tower along the back
wall of tile refl'igerator and tile fl'eezer. Placing food
hi fl'ont of the louvers on these components will not
affect performallce.
5