Electrolux E42BS75ETT - 42" - Refrigerator Owner's Manual And Installation Instructions page 26

Installation Instructions
3/4" FULL-WIDTH OVERLAY CUSTOM PANELS
This panel design provides a nearly trimless appearance.
Assemble the spacer panel onto the backer panel. Allow 1/2" clearance on all four sides of the
grille spacer panel, Allow 1/2" clearance on the top and hinge side, 15116" on the bottom and 3-5/8"
on the handle side of the upper freezer door panel. Allow 15116" on the top, 1/2" clearance on the
bottom and hinge side and 3-5/8" on the handle side of the lower freezer door panel. Secure the
panels with glue. Be sure to observe clearances on all sides.
Secure the appearance panel to the assembled backer/spacer panel. Use glue
and screws, Countersink screws into the backer panel.
Grille Panel
_la 2_L'_ r;1 I:]
114" Backer Panel 39-15/16" 10-314"
0.10" Spacer Panel 38-15116" 9-3/4"
3/4" Overlay Panel 40-3/16" 11"
3q/8"
Required for Optimal
Handle Clearance
Upper Freezer Panel
_la _r_ _ r;1 I:]
1/4" Backer Panel 16-7/16" 17-13/16"
0.10" Spacer Panel 12-5/16" 16-3/8"
3/4" Overlay Panel 13-7/16" 17-5/8"
5/I 6"
3-I/8"
Lower Freezer Panel
_la _r_ _ r;1 I:]
1/4" Backer Panel 16-7/16" 35-118"
0.10" Spacer Panel 12-5/16" 33-11116"
3/4" Overlay Panel 13-7/16" 34-15116"
Upper Freezer Panel
Spacer Assembly
3-5/8"
112"
Spacer
Panel
15/16"_
5/16"
B
J
Finished
BackerPanel
Lower Freezer Panel
Spacer Assembly
3-5/8"
1/2"_
Spacer
1/2,,_C:
Finished
BackerPanel
26