Wall Mounting (Optional) - ViewSonic VA902 User Manual

Wall Mounting (Optional)

To obtain a wall-mounting kit, contact ViewSonic
instructions that come with the base mounting kit. To convert your LCD display from a desk-
mounted to a wall-mounted display, do the following:
ViewSonic VA902/VA902b
®
1. Verify that the Power button is turned
2. Push the LCD display back and down
3. Lay the LCD display face down on a
Four
screw
4. Attach the mounting bracket from the
holes
5. Attach the LCD display to the wall,
Mounted
on the wall
or your local dealer. Refer to the
Off, then disconnect the power cord.
flat against the base as shown.
towel or blanket. Notice the four
screw holes on the back cover.
VESA compatible wall mounting kit
(100 mm x 100 mm distance).
following the instructions in the wall-
mounting kit.
6