Related Manuals for Yamaha disklavier DGC1M4
Summarization of Contents
Introduction
Name Plate Location
Location of the name plate for model, serial number, and purchase date recording.
MKIV/Pro Installation Manual
Pedal Lyre Installation
Instructions for installing the pedal lyre system.
Attaching the Media Center Unit
Steps for connecting the Media Center unit to the system.
Speaker Installation for MKIV
Guide for installing monitor speakers for the MKIV series.
Setting Up the PRC100 Pocket Controller
Instructions for preparing and setting up the PRC100 pocket controller.
Preparing the Tablet Controller
Steps for setting up the Tablet Controller, including cradle and battery.
Action and Pedal Check
Procedure for removing the action and checking the pedal mechanism.
Turning the Disklavier On
Steps for powering on the Disklavier system.
Post-Delivery Check with Service Center Program
Performing post-delivery checks using the Service Center program.
Operating Demo Songs
Guide to playing and demonstrating the built-in demo songs.
Standby Mode and Shutdown Procedures
Instructions for putting the Disklavier into standby or shutting it down completely.
Power Supplying Status Overview
Flowchart illustrating the power supply states of the Disklavier system components.
PRC100 Initial Settings
Initial configuration steps for the PRC100 pocket controller.
PRC100 Task Bar and Time Zone Configuration
Setting up the task bar and time zone on the PRC100 pocket controller.
PRC100 Rebooting, Resetting, and Pairing
Procedures for troubleshooting and re-establishing connection for the PRC100.
Regular Field Servicing
Pedal Unit Adjustment
Procedures for adjusting and calibrating the pedal unit.
Hammer Sensor Removal and Re-installation
Steps for removing and reinstalling hammer sensors, including calibration.
Maintenance Mode in Service Center
Accessing and using the maintenance mode within the Service Center program.
Keyboard Calibration via Switch
Performing keyboard calibration using specific key switch combinations.
Electrical Checks via Maintenance Mode
Performing electrical system checks using the maintenance mode.
Replacing Gray-Scale Shutters
Key and Hammer Shutter Replacement
Procedure for replacing key and hammer gray scale shutters.
Software Updates
Updating the Disklavier System
Steps to update the Disklavier's I/O Center and Central Signal Processor.
Updating the Tablet Controller
Instructions for updating the Tablet Controller software.
Troubleshooting and Error Logs
Troubleshooting System Issues
Identifying causes and first aid for system problems.
Video Synchronized Recording
Setting Up Camcorder and Disklavier
Procedures for connecting and setting up the camcorder and Disklavier for synchronized recording.
Wireless LAN Network Checks
Checking LAN Communication Quality
Verifying network signal and quality for controller connectivity.
Service Center Program Map
Service Center Menu Index
Overview of the Service Center program menu structure and functions.
Need help?
Do you have a question about the disklavier DGC1M4 and is the answer not in the manual?
Questions and answers