Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for New Holland 616
Summarization of Contents
To the Owner
Recording Machine Information
Record Model and Product Identification Number (PIN) for parts ordering and reference.
Understanding Safety Symbols
Explains the meaning of the safety alert symbol and warnings.
Product Improvements Policy
CNH America LLC reserves the right to improve products without prior obligation.
Precautionary Statements
Personal Safety Definitions
Defines DANGER, WARNING, and CAUTION levels for hazard communication.
Machine Safety Definitions
Defines the use of 'IMPORTANT' for machine safety and information.
General Information Notes
Explains the use of 'NOTE' for supplementary information.
Safety
General Safety Precautions
Lists critical safety rules for operating the mower to prevent accidents.
Safety Decals Identification
Locates and explains the purpose of safety decals on the machine.
Ecology and the Environment
Environmental Handling Guidance
Provides recommendations for safe use and disposal of chemical products.
Section 1: General Information
Pre-Operation Checks
Covers initial inspections and checks before using the new machine.
Initial Operation Checks
Specific checks to perform after the first 8 hours of operation.
Tractor Compatibility Requirements
Details the necessary tractor specifications for safe operation.
Attaching Mower to Tractor
Step-by-step guide for connecting the mower to the tractor.
Section 2: Operation
Field Opening Procedures
How to start cutting fields and initial field setup.
Field Cutting Techniques
Detailed instructions for cutting crops in fields, including cornering.
Adverse Field Condition Adjustments
Adjustments for operating in rough, stony, or debris-ridden fields.
Cutter Bar Flotation Adjustment
How to adjust the cutter bar to follow ground contours.
Section 3: Lubrication
Lubrication Importance and Intervals
Explains the significance of regular lubrication and service intervals.
Grease Fitting Lubrication
Procedures for lubricating grease fittings on the machine.
Gearbox Oil Maintenance
Specific instructions for checking and changing gearbox oil.
Section 4: Maintenance
Hardware Tightening Torques
Specifies torque values for various fasteners and hardware.
Drive Belt Service
Instructions for checking, adjusting, and replacing the drive belt.
Knife Maintenance and Replacement
Procedures for inspecting, turning, and replacing cutting knives.
Mower Storage Procedures
Steps for preparing and storing the mower for off-season.
Section 5: Troubleshooting
Vibration Diagnosis and Correction
Identifies causes and solutions for machine vibration.
Cutter Bar Flotation Issues
Addresses problems related to the cutter bar not floating correctly.
Stubble and Streaking Issues
Troubleshooting for uneven stubble or streaking during cutting.
Section 6: Optional Equipment
Swathboard Kit Installation
Details on installing right and left swathboard kits.
High Stubble Kit Installation
Instructions for installing the high stubble kit for increased cutting height.
Knife Type Selection Guide
Describes different knife styles for specific crop and field conditions.
Section 7: Specifications
Cutter Bar Specifications
Technical data for cutter bar dimensions, angles, and speed.
Driveline and Hitch Specifications
Technical data for PTO, driveline protection, and hitch types.
Machine Dimensions and Weight
Overall width, length, height, and weight of the mower.
Need help?
Do you have a question about the 616 and is the answer not in the manual?
Questions and answers