Related Manuals for Swiwin SW140
Summarization of Contents
Introduction to SWIWIN Turbines
Non-Disclaimer and User Responsibility
Warns about inherent dangers of turbines and user responsibility for risks and damages.
Safety First Guidelines
Warning to Bystanders
Users must ensure bystanders maintain a safe distance during engine operation.
Fire Extinguisher Requirements
Crucial to have CO2 and Class ABC extinguishers on hand; dry chemical can damage turbines.
Failsafe and Ear Protection
Setting radio failsafe for signal loss and using ear protection for high noise levels.
Burns Hazard Warning
Warning about hot exhaust gases causing burns and damage to nearby objects.
Turbine Oil and Assistants
Turbine Oil Toxicity and Handling
Warns about turbine oil toxicity, safe storage, and health risks from exhaust inhalation.
Ground Assistants and Oil Requirements
Requirements for qualified assistants and the specified turbine oil for operation.
SWIWIN Limited Lifetime Warranty
Warranty Coverage Details
Details warranty transferability, coverage period, and specific parts covered.
Warranty Terms and Exclusions
Service and Repair Terms
Outlines terms for repair, labor charges, and specific circumstances voiding warranty coverage.
Warranty Exclusions List
Lists specific circumstances and misuse that will void the warranty.
Operation and Setup Guide
Motor Kit Components Identification
Lists components provided in the motor kit, illustrated by Figure 2.
ECU and Power Connections
Details connecting the RJ45 data cable and the yellow power cable to the ECU.
ECU Connections and Power Management
Throttle, Battery, and Pump Connections
Explains connecting servo cable to ECU, battery cable, and pump cable to ECU ports.
GSU Connection to ECU
Describes connecting the GSU to the ECU, noting signal direction and polarity.
Component Illustrations and Diagrams
Engine and Pump Diagrams
Visual guide to connecting the engine, pump, and related components.
ECU and GSU Interface Views
Shows ECU connections and GSU interface with display elements.
Brushless Pump Types and Setup
Motor Setup and Test Stand Use
Advises using a test stand for initial setup and familiarization before installing in an aircraft.
Plumbing and Fuel System Setup
Fuel Line Routing and Connections
Details the routing of fuel tubing, filter, shutoff, and supertrap pump connections.
Radio Setup and Training
Learn RC Calibration Process
Guides on training the transmitter to the ECU, setting max, idle, and min values.
Servo Tester and Pump Priming
Using a Servo Tester for Diagnostics
Explains how a servo tester can be used in place of a radio for testing purposes.
Priming the Fuel Pump
Step-by-step guide to prime the pump and remove air from fuel lines before engine start.
Startup Operation Overview
Initial Power-Up Sequence
Details the initial steps for starting the turbine, including power sequence and fuel valve.
Startup Phases Explained
Ignition, Preheat, and Fuelramp Phases
Explains the ignition, preheat, and fuelramp phases of the startup sequence.
First Time Use Calibration
Describes the ECU training process for first-time engine use, including stick adjustments.
Shutdown Procedure and ECU
Turbine Cooldown and Shutdown Steps
Outlines the correct procedure for shutting down the turbine and the importance of cooldown.
SWIWIN ECU Overview and Benefits
Describes the SWIWIN ECU as a 32-bit microprocessor-based unit designed for SWIWIN Turbines.
ECU Features and Screen Navigation
ECU Features List
Lists ECU features like data logging, auto start, and automatic restart.
ECU/Motor Electrical Connections
Specifies voltage limits for receiver and power connections to the ECU.
GSU Screen Functions and Display
Explains GSU button functions and details the initial screen and running status display.
Running Screen Modes and Navigation
Large Font Running Screen Control
How to toggle between large font and normal display modes on the running screen.
Main Menu Navigation and Options
Explains how to navigate the main menu and access different sub-menus like StartUp and Running.
Start Up Screen Advanced Functions
Details advanced functions available on the startup screen, including pump voltage settings.
Startup Parameter Configuration
Pump Voltage and Ramps Settings
Setting pump voltage, RPM startup ramp, and pump startup ramp for initial engine start.
Pump Auto, GlowPlug, and Gas Valve
Configuring pump auto settings, glow plug voltage, and gas/fuel valve timing.
Ignition RPM and Starter Off RPM
Setting ignition RPM and RPM for starter motor disengagement.
Learn RC and Cooling Settings
Transmitter Training to ECU (Learn RC)
Guides on training the transmitter to the ECU, setting max, idle, and min values.
Engine Cooldown RPM Settings
Configuration of cooling RPM after shutdown or manual testing to cool the engine.
Running Display Parameters Configuration
RPM Acceleration Curve and Delay Time
Adjusting acceleration rate and delay time for optimal response and to prevent flameout.
Max RPM, Idle RPM, and Min RPM Settings
Setting maximum, idle, and minimum RPM values for engine operation.
Low Volt Warning and Restart Options
Configuring low voltage warnings and automatic restart after flameout.
Test Function Menu Operations
Testing Pump and Fuel Valves
Performing tests on the fuel pump and fuel valve functions.
Testing Gas Valve, Glow Plug, and Starter
Testing gas valve, glow plug circuit, and manually activating the starter motor.
Data Chart Usage and Interpretation
Recording and Interpreting Running Data
Using the data chart to record and step through running events with color-coded parameters.
ECU Parameters for Brushless Starter
Startup and Starter Parameter Settings
Table detailing ECU parameters for startup and starter functions across different models.
Cooling and Run Parameter Settings
Table detailing ECU parameters for cooling and running phases across different models.
Engine Diagrams and Dimensions
SW45B Dimensions
Provides dimensional drawings and specifications for the SW45B model.
SW60B/80B Dimensions
Provides dimensional drawings and specifications for the SW60B/80B models.
Engine Diagrams (Continued)
SW120B/140B Dimensions
Provides dimensional drawings and specifications for the SW120B/140B models.
SW190B Dimensions
Provides dimensional drawings and specifications for the SW190B model.
Specifications Overview
Model Specifications Table
Comprehensive table listing specifications like diameter, thrust, EGT, and consumption for all models.
Service and Support Information
Contact Details for Sales and Service
Provides website, email, and phone contact information for sales and service.
Need help?
Do you have a question about the SW140 and is the answer not in the manual?
Questions and answers