Desa CSG3930PR Owner's Operation And Installation Manual page 16

INSTALLATION
16
Installing Logs (Cont.)
INSTALLATION
Continued
Models VRL24NR, VRL24PR, VRL30NR, VRL30PR,
VRL24NT, VRL24PT, VRL30NT and VRL30PT
1. Place log #1 (ember bed) onto base over log alignment screws
to the left of front burner and behind middle burner. Log #1
will sit on top of front and middle burners (see Figure 23).
2. Place log #2 to right of log #1 and onto log alignment screw as
shown in Figure 24. Log #2 will wrap around right end of rear
burner (see Figure 24).
3. Place log #3 on left side of base and onto alignment screw to
right of rear burner (see Figure 24). Log #3 will wrap around
left end of rear burner.
4. Place log #4 onto two alignment screws to rear of base (see
Figure 25).
5. Locate hole on bottom of log #5 and place over pin on log #2.
Log #5 will rest on back of log #1 (ember bed). See Figure 23
and 26.
6. Place log #6 onto two pins on log #1 (ember bed) and rest
back of log #6 on back log #4 (see Figure 26).
Figure 23 - Installing Log #1 (Ember Bed) (Model VRL30NR
Shown)
For more information, visit www.desatech.com
For more information, visit www.desatech.com
Log #5 will seat in
this location.
Log #1
Log #3
Log #1
Figure 24 - Installing Log #2 (Right) and Log #3 (Left)
(Model VRL30NR Shown)
Log #3
Log #1
Figure 25 - Installing Log #4 (Model VRL30NR Shown)
Log #3
Log #1
Figure 26 - Installing Log #5 and Log #6 (Model VRL30NR Shown)
Log #2
Log #4
Log #2
Log #6
Log #5
Log #4
Log #2
110021-01G