Setting The Audio Setup - Sherwood V-903 - AUTRE Operating Instructions Manual

SETTING THE AUDIO SETUP

Press the CURSOR ¡ ã /¡ å
1
§ š When selecting the AUDIO OUT
Notes:
• This unit can output a preferred digital audio signal format or not from the DIGITAL OUTs.
Therefore, you should set the AUDIO OUT to either SPDIF/OFF or corresponding digital out setting (SPDIF/RAW or
SPDIF/PCM) according to system connections, etc.
• When the DIGITAL OUT of the unit is connected to the DIGITAL IN of an amplifier which does not contain the Dolby Digital
or DTS decoder (which processes the bitstream signal), you should set the AUDIO OUT to SPDIF/PCM to convert Dolby
Digital or DTS bitstream to linear PCM (2 channel) of 48 kHz/16 bit and to output it.
• If the AUDIO OUT is not set correctly, loud noise or no sound may be heard from the speakers, and it may be harmful to
your ears and damage the speakers.
§ š When selecting the DOWNMIX
• Depending on whether the AUDIO OUTs (or the A/V SCART OUTPUT connector) are connected to a stereo
amplifier/receiver/TV or an A/V amplifier/receiver with built-in surround decoder, you should set the DOWNMIX correctly.
Note:
• The DOWNMIX setting affect only the output signal from the AUDIO OUT jacks (or the A/V SCART OUTPUT connector)
when playing back a DVD Video, etc. recorded in multi-channel signal format.
•AUDIO OUT: When outputting a preferred digital audio signal format or not from
the DIGITAL OUTs.
•DOWNMIX: When outputting a preferred analog audio signal format.
buttons to select the preferred item.
• Then the setting menu of the selected item is displayed.
• SPDIF / OFF: When outputting no digital audio signal.
• SPDIF / RAW: When outputting the digital audio signal as it was
• SPDIF / PCM: When converting DTS or Dolby Digital bitstream to
• Lt/ Rt: When enjoying multi-channel surround sound by connecting
the unit's AUDIO OUTs to an A/V amplifier/receiver with
built-in surround decoder.
• Lo / Ro: When enjoying conventional 2 channel stereo sound by
connecting the unit's AUDIO OUTs to a stereo amplifier/
receiver/TV.
35
recorded.
linear PCM (2 channel) of 48 kHz/16 bit and
outputting it.