Related Manuals for bimak TAF/C
Summarization of Contents
General Description of the Machine and Operation
Safety Warnings
Essential safety precautions and warnings for operating the machine.
Machine Description
Overview of the machine's design and purpose.
Operating Modes
Details on the automatic and manual operating modes of the drill.
Safety Guidelines
Proper Use
Guidelines for the intended and correct use of the drilling machine.
Improper Use
Prohibitions and forbidden uses of the machine.
Operator Qualifications
Required skills and training for operating the drill.
Working Position
Specifies the correct operator position during use and maintenance.
Handling, Transport, and Storage
Supply Condition
Description of the machine's condition upon delivery.
Transport and Handling Instructions
Instructions for safe transportation and handling of the machine.
Storage Guidelines
Guidelines for storing the machine when not in use.
Installation and Preparation Procedures
Foundations and Anchoring
Requirements for machine foundation, anchoring, and leveling.
Environmental Conditions
Specifies acceptable temperature and humidity limits for operation.
Filling Operations
Procedures for filling cutting fluid and feed box oil.
Power Connections
Instructions for connecting the machine to the power supply.
Start-Up and Operation
Electrical Controls
Overview and identification of electrical control panel components.
Switching On Procedure
Step-by-step procedure for safely switching on the machine.
Chuck Speed Selection
Methods for selecting the appropriate chuck speed.
Speed Selection Methods
Belt Speed Change
Procedure for changing the belt speed on the machine.
VAR/S Speed System
Instructions for speed selection using the VAR/S system.
VAR/R Speed System
Instructions for speed selection using the VAR/R system.
VAR/E SpeedTronic System
Instructions for speed selection using the VAR/E SpeedTronic system.
Drilling Operations
Drilling Overview
Detailed operations and procedures for drilling.
Automatic Feed Drilling
Procedure for drilling using the automatic feed function.
Micrometric Manual Feed Drilling
Using manual micrometric feed for precise drilling operations.
Manual Feed Drilling
Procedure for drilling using manual feed control.
Specialized Machining Operations
Tapping Operations
Instructions for performing tapping operations with the machine.
Milling Operations
Guidelines and procedures for milling operations.
Turntable with Vice Usage
How to use and orient the turntable with the vice attachment.
Worktable Operations
Cross Worktable Usage
Instructions for operating and adjusting the cross worktable.
Automatic Cross Worktable
Procedure for operating the automatic cross worktable feature.
Safety Interlocks and Systems
Interlock Systems
Explanation of safety interlock systems and their function.
Cooling System Activation
Procedure for activating and directing the cooling system.
Worktable Lighting
How to operate the machine's worktable lighting.
Emergency Stop and Shutdown
Emergency Stop Procedure
Instructions on how to use the emergency stop button and restart the machine.
Switching Off Procedure
Procedure for safely switching off the machine.
Maintenance and Repair
Authorised Servicing
Information on authorized servicing and contact procedures.
User Maintenance Activities
User-maintainable tasks and procedures.
Authorised Service Companies
List of authorized companies for servicing the machine.
Warranty and Routine Upkeep
Warranty Terms and Conditions
Details of the warranty coverage and terms.
Routine Checks and Replacements
Scheduled checks and part replacements for maintenance.
Cleaning Procedures
Procedures for cleaning the machine after use.
Lubrication and Parts
Lubrication and Lubricants
Lubrication points and recommended lubricants for the machine.
Manual Lubrication Guide
Step-by-step guide for manual lubrication of machine parts.
Maintenance Instructions
Recommended Lubricants
Specific recommendations for oils and greases for machine lubrication.
Replacement Parts
Information on identifying and obtaining replacement parts.
General Maintenance Instructions
General guidelines and precautions for machine maintenance.
Component Adjustments
Safety Coupling Adjustment
Procedure to adjust the safety coupling for correct operation.
Chuck Return Spring Adjustment
How to adjust the chuck return spring mechanism.
Quill Play Adjustment
Procedure for adjusting the play in the drill's quill.
Belt Tensioning and Adjustments
Automatic Lowering Coupling Adjustment
Adjusting the automatic lowering coupling for proper engagement.
Tensioning of Belts
Instructions for tensioning drive belts for optimal performance.
V-Belt Speed Change Tensioning
Tensioning V-belts for speed change mechanisms.
Variator Belt Adjustments
VAR/S – VAR/R Belt Tensioning
Belt tensioning for VAR/S and VAR/R speed variator systems.
VAR/E Timing Belt Tensioning
Procedure for tensioning or replacing the timing belt for VAR/E.
Machine Storage and Disposal
Temporary Decommissioning
Procedures for safely storing the machine for extended periods.
Final Disposal Guidelines
Guidelines for dismantling and disposing of the machine.
Technical Characteristics
Overall Technical Specifications
Detailed specifications and performance data of the machine.
Dimensions and Foundation Measurements
Physical dimensions and foundation layout requirements for the machine.
Machine Specifications and Data
Airborne Noise Emission
Information on noise levels produced by the machine.
Vibration Analysis
Details about machine vibration and potential causes.
Machine Chuck Bearings
List of bearings used in the machine chuck assembly.
Machine Components Data
Belts Used on Machine
Table listing belt types, sizes, and distances used on the machine.
CE Marking Information
Information regarding the CE conformity marking on the machine.
Need help?
Do you have a question about the TAF/C and is the answer not in the manual?
Questions and answers