Related Manuals for bimak TAF Series
Summarization of Contents
1 GENERAL DESCRIPTION OF THE MACHINE AND ITS OPERATION
1.1 Safety warnings
General safety warnings that must be complied with at all times.
1.2 Description
Description of the pillar drill and drill mill machines.
1.3 Operating modes
Details on the machine's automatic and manual operating modes.
8 APPENDIX
APPENDIX 1 – CE Declaration of conformity
Official document confirming the machine's compliance with EU directives.
APPENDIX 2 – Exploded diagrams & replacement parts
Visual breakdowns and lists for machine components and spare parts.
APPENDIX 3 – Electrical diagram
Schematic representation of the machine's electrical connections and circuits.
APPENDIX 4 – Worktable feed motors (OPTIONAL)
Information regarding optional worktable feed motors for X/Y axes.
APPENDIX 5 – Digital readout system (OPTIONAL)
Details on the optional Heidenhain ND 5023 digital readout system.
2 SAFETY
2.1 Proper use
Guidelines for the correct and intended use of the drilling machine.
2.2 Improper use
Prohibited uses and actions that are not allowed with the machine.
2.3 Operator qualifications
Required skills and training for operators using the drilling machine.
2.4 Working position
Description of the standard working position and operator responsibilities.
2.5 Personal protection
Analysis of risks, safety measures, and required personal protective equipment (PPE).
2.6 Other risks
Discussion of additional risks not specifically associated with the machine type.
2.7 Legal compliance – Technical safety standards applied
Overview of applicable EU directives and technical safety standards.
3 HANDLING AND TRANSPORT STORAGE
3.1 Supply condition
Details on how the machine is delivered from the manufacturer.
3.2 General transport and handling instructions
Instructions for the safe transport and handling of the machine.
3.3 Storage
Recommendations for storing the machine in optimal conditions.
4 INSTALLATION AND PREPARATION
4.1 Foundations and anchoring – levelling
Guidance on preparing the foundation and anchoring the machine.
4.2 Environmental conditions
Recommended environmental conditions for machine operation.
4.3 Filling operations
Instructions for filling cutting fluid and feed box oil.
4.4 Power connections
Procedures for connecting the machine to the electrical power supply.
4.5 Preparation
Steps for initial cleaning and preparing the machine for use.
5 START-UP AND OPERATION
5.1 Electrical controls
Overview and identification of the machine's electrical control panels.
5.2 Switching on
Step-by-step procedure for safely switching on the machine.
5.3 Chuck speed selection
Methods for selecting the appropriate chuck speed for various models.
5.4 Drilling
Detailed instructions for different drilling operations: automatic, micrometric, and manual.
5.5 Tapping
Procedures and warnings for performing tapping operations with the machine.
5.6 Milling
Guidelines and precautions for milling operations using the machine.
5.7 Use of turntable with vice
Instructions for orienting and using the turntable with the vice.
5.8 Use of cross worktable
Guidance on lubricating and adjusting the cross worktable.
5.9 Interlocks
Explanation of safety interlock systems for chuck and pulley compartments.
5.10 Cooling
Instructions for activating and directing the cooling system.
5.11 Lighting
Information on how to use the worktable lighting.
5.12 Emergency stop
Procedure for using and resetting the emergency stop button.
5.13 Switching off
Steps for safely switching off the machine after operation.
6 MAINTENANCE AND REPAIR
6.1 Authorised servicing
Information on user maintenance and authorised service companies.
6.2 Warranty terms and conditions
Details of the manufacturer's warranty and exclusions.
6.3 Routine checks and replacements
Scheduled checks and replacement procedures for machine components.
6.4 Cleaning
Cleaning procedures to be performed after each work shift.
6.5 Lubrication and recommended lubricants
Guidance on manual lubrication and recommended lubricant types.
6.6 Replacement parts
Information on identifying and obtaining replacement parts.
6.7 General maintenance instructions
Safety precautions and instructions for general maintenance tasks.
6.8 Temporary decommissioning
Procedures for safely storing the machine for extended periods.
6.9 Final disposal
Guidelines for the dismantling and disposal of the machine.
7 TECHNICAL CHARACTERISTICS
7.1 Technical characteristics
Detailed specifications and data for various machine models.
7.2 Airborne noise emitted by the machine
Information on noise levels produced by the machine during operation.
7.3 Vibration
Notes on machine vibration and potential causes.
7.4 Bearings on machine chuck
Identification of bearings used on the machine chuck.
7.5 Belts on machine
Table listing belt types and distances for different speed change systems.
7.6 CE marking
Explanation of the CE marking affixed to the machine.
Need help?
Do you have a question about the TAF Series and is the answer not in the manual?
Questions and answers