Related Manuals for Veriton VN4660G
Summarization of Contents
Disassembly Procedures
Safety Guidelines
Essential safety precautions to follow before performing any disassembly procedures.
Recommended Equipment
List of tools and equipment recommended for maintenance procedures.
WEEE Annex VII Component
Identification of components requiring selective treatment according to WEEE Annex VII.
Pre-disassembly Instructions
Steps to prepare the system before starting any maintenance or disassembly.
Chassis Door Removal
Remove the Chassis Cover
Procedure to remove the computer's chassis cover.
HDD Removal
Remove the HDD
Steps to remove the Hard Disk Drive (HDD) module from the system.
SSD Module Removal
Remove the SSD modules
Procedure for removing Solid State Drive (SSD) modules from the mainboard.
WLAN Module Removal
Remove the WLAN module
Steps to disconnect and remove the Wireless Local Area Network (WLAN) module.
Optional Port Module Removal
Remove the Optional Port Module
Procedure to remove optional port modules like Display Port, HDMI, D-SUB, or USB.
Heatsink Fan Removal
Remove the Heatsink Fan
Instructions for disconnecting and removing the heatsink and fan assembly.
Memory Module Removal
Remove the Memory modules
Steps to release latches and remove memory modules (DIMMs) from the slots.
Thermal Module Removal
Remove the Thermal Module
Procedure to loosen screws and remove the thermal module from the mainboard.
CPU Removal
Remove the CPU
Steps to release the lever and remove the Central Processing Unit (CPU) from its socket.
Speaker Removal
Remove the Speaker
Procedure to disconnect the speaker cable and detach the speaker unit.
Expansion Box 2 Cover Removal
Remove the Expansion Box 2 Cover
Steps to remove screws and detach the cover of Expansion Box 2.
VGA Card Removal
Remove the VGA Card
Procedure to remove the Video Graphics Array (VGA) card from its slot.
Expansion Box 2 Front Bezel Removal
Remove the Expansion Box 2 Front Bezel
Steps to disengage latches and detach the front bezel of Expansion Box 2.
Card Reader Assembly Removal
Remove the Card Reader Assembly
Procedure to disconnect the card reader cable and remove the assembly.
Expansion Box 2 Removal
Remove the Expansion Box 2
Steps to remove the screw and detach Expansion Box 2 from the chassis.
Expansion Box 1 Cover Removal
Remove the Expansion Box 1 Cover
Steps to remove screws and detach the cover of Expansion Box 1.
ODD Module Removal
Remove the ODD (for models with ODD module on Expansion Box 1 only)
Steps to remove the Optical Disk Drive (ODD) module from Expansion Box 1.
HDD Module Removal
Remove the HDD (for models with HDD module on Expansion Box 1 only)
Procedure to remove the HDD module from Expansion Box 1.
HDD/ODD Board Removal
Remove the HDD/ODD Board
Steps to disconnect the cable and remove the HDD/ODD board.
SATA Latch Board Removal
Remove the SATA Latch Board
Procedure to detach the SATA latch board and its bracket.
Mainboard Removal
Remove the Mainboard
Steps to remove screws and lift the mainboard from the chassis.
RTC Battery Removal
Remove the RTC battery
Procedure to push and lift the Real-Time Clock (RTC) battery off the mainboard.
Troubleshooting
Power-On Self-Test (POST)
Explanation of the Power-On Self-Test (POST) procedure and its function.
POST Error Messages List
List of POST error messages and their corresponding actions or FRUs.
Need help?
Do you have a question about the VN4660G and is the answer not in the manual?
Questions and answers