Related Manuals for Krone KWT 8.50/8
Summarization of Contents
Foreword and Parts Ordering
Ordering Replacement Parts
Guidance on how to order spare parts, including required information.
General Operation and Safety
Operation in Accordance with Specifications
Guidelines for using the rotary tedder according to intended agricultural use.
Safety and Accident Prevention Regulations
Crucial safety rules to prevent accidents during operation and transport.
Attached Equipment
Information on connecting and handling attached equipment safely.
Power Take-Off Shaft Operation
Safe procedures and precautions for operating the PTO shaft.
Hydraulic System and Maintenance
Hydraulic System Operation and Safety
Operation, safety, and maintenance of the pressurized hydraulic system.
General Maintenance Procedures
Routine checks, cleaning, and greasing for proper operation.
Introduction and Machine Information
Technical Data and Specifications
Detailed technical specifications for different rotary tedder models.
Warning Signs and Safety Information
Explanation of warning signs, their location, and meaning for safe operation.
Information Labels Location
Details on the placement of general information labels on the machine.
Putting the Machine into Operation
Operation Safety Precautions
Essential safety rules to follow before and during machine operation.
Hydraulic System Safety and Operation
Safety notes and procedures for the pressurized hydraulic system.
Tractor Attachment Procedures
Step-by-step guide for attaching the rotary tedder to the tractor.
Lights and Safety Equipment Setup
Instructions for installing and checking lights and protective equipment.
Working and Transport Position Adjustment
Adjusting the machine for optimal working or transport configuration.
Removing the Rotary Tedder
Procedures for safely detaching the rotary tedder from the tractor.
Adjustments and Settings
Safety Notes for Adjustments
Critical safety precautions to observe before performing any adjustments.
Swather Disc Spreading Angle Adjustment
How to adjust the spreading angle for optimal crop distribution.
Swather Disc Tine Height Adjustment
Setting the correct working height for the swather disc tines.
Swather Disc Ground Adjustment
Adjusting ground clearance for second and outer swather discs.
Tine Adjustment Procedure
Steps for setting the tines vertically to the ground.
Service and Maintenance
Safety Notes for Service and Maintenance
Essential safety precautions to take during all service and maintenance tasks.
General Maintenance Procedures
Routine checks, cleaning, and greasing for proper operation.
Hydraulic System Maintenance
Maintenance requirements and procedures for the hydraulic system.
Tyre Maintenance and Pressure
Tyre care, including checking air pressure and maintenance.
Lubrication Points and Intervals
Overview of lubrication points and recommended intervals for tedder maintenance.
Winter Storage Procedures
Safety Notes for Winter Storage
Important safety precautions before storing the machine for winter.
General Storage and Preparation
Steps for cleaning, greasing, and storing the tedder to prevent damage.
Putting Back into Operation
Safety Notes for Re-commissioning
Critical safety measures before operating the tedder after storage.
General Re-commissioning Steps
Procedures for preparing the tedder for use at the start of the season.
Accessories
Night Swath Gearbox Installation
Instructions for fitting the optional night swath gearbox.
Tine Loss Protection and Depth Control Chain
Installation of tine loss protection and depth control chain.
Appendix: Assembly Instructions
Appendix Safety Precautions
Safety guidelines specific to the assembly process.
General Assembly Preparations
Initial steps and checks before starting the assembly.
Assembling Swather Disc Arms
Detailed steps for attaching swather disc arms to the disc plate.
Assembling Tandem Axles and Wheels
Guide for assembling tandem axles and undercarriage wheels for KWT 7.70/6x7.
Assembling Protective Frames and Lights
Instructions for fitting protective frames and lights for KWT 7.70/8.80.
Need help?
Do you have a question about the KWT 8.50/8 and is the answer not in the manual?
Questions and answers