Related Manuals for GOM ATOS III Triple Scan
Summarization of Contents
Important Notes
Symbols
Defines standard signal words used in the manual, such as WARNING, CAUTION, NOTICE, and INFO.
Safety and Health Hazard Notes
Provides critical safety and health warnings for operating the ATOS system, including laser safety and electrical precautions.
Legal Notes
Outlines copyright, warranty, and usage restrictions for the publication, including GOM's rights and disclaimers.
System Types
Overview of ATOS Triple Scan System Types
Details ATOS II and III system variants, resolutions, and camera support lengths, comparing different models.
Hardware and Software Components of Measuring System
Lists the essential hardware and software required for the ATOS measuring system, including PC and network requirements.
Information About the Sensor
Sensor Configurations
Details sensor setup options, measuring areas, camera positions, focal lengths, and calibration objects for different configurations.
Definition of Terms
Clarifies key terminology used in the manual, such as measuring volume, camera angle, and measuring distance.
Lenses
Lens Types
Describes different lens models for camera positions 400/800 and SO, including their markings and handling instructions.
Control Elements and LED Indicators
Web Interface
Guides users on accessing and navigating the sensor's web-based control interface for status monitoring and configuration.
Operation of Pan and Tilt Head (Option)
Positioning of Sensor
Provides instructions on how to safely position the ATOS sensor using the optional pan and tilt head.
Locking Mechanism of Sensor Fixture
Explains how to secure the ATOS sensor to the mounting fixture using the hexagon plate and levers.
Sensor Setup
General
Outlines prerequisites and general considerations for sensor setup, including software installation and lens selection.
Measuring Volume
Explains how to determine and select the appropriate measuring volume based on camera positions 400, 800, and SO.
Changing the Camera Positions (Step by Step)
Provides detailed instructions for reconfiguring the sensor's camera positions from 400 to SO and vice versa.
Wireless Remote Control
Preparing the Remote Control
Guides users on installing batteries and connecting the wireless remote control receiver to the measuring computer.
Explanation of the Function Keys
Details the function of each key on the wireless remote control for system operation and measurement control.
Sensor Calibration
How to Handle Calibration Objects
Provides essential guidelines for safely handling and maintaining calibration panels and crosses to ensure accuracy.
Calibration Conditions
Specifies the environmental conditions and prerequisites necessary for successful sensor calibration, including warm-up time.
Calibration Using Calibration Panel CP 40
Handling Instructions for Calibration Panel CP40
Offers detailed care and handling instructions for the CP40 calibration panel to ensure accuracy and prevent damage.
Loading the Calibration Data
Explains how to load calibration data files from the CD into the ATOS software for sensor calibration.
Preparing the Calibration Process
Details sensor and software preparation for calibration with the CP40 panel, including temperature entry.
Calibration Process
Outlines the step-by-step procedure for performing sensor calibration with the CP40 panel using the ATOS software.
Calibration Result
Explains how to interpret calibration results, identify good/bad outcomes, and troubleshoot common issues.
Calibration Using Calibration Cross CC 30
Handling Instructions for Calibration Cross CC 30
Provides care and handling instructions for the CC 30 calibration cross, emphasizing surface sensitivity.
Entering Calibration Data into ATOS
Guides on inputting calibration data for the CC 30 cross into the ATOS software for accurate measurement.
Preparing the Calibration Process
Details sensor and software preparation for calibration with the CC 30 cross, ensuring correct positioning.
Calibration Process
Outlines the step-by-step procedure for calibrating with the CC 30 cross, including exposure time adjustment.
Calibration Result
Explains how to assess and verify the calibration outcome with the CC 30 cross, checking for good or insufficient results.
Quick Calibration
Describes how to perform a quick recalibration if the sensor is slightly disturbed or decalibrated.
Cabling
Cabling with 19" PC
Details the cabling connections between the ATOS sensor and a standard 19-inch PC, including data links.
Cabling with Laptop
Explains the specific cabling requirements for connecting the ATOS sensor to a laptop, emphasizing GigE data links.
Network Port
Notes for Network Administrators
Provides guidance on network settings, firewalls, and GigE data links for ATOS systems, ensuring uninterrupted operation.
Need help?
Do you have a question about the ATOS III Triple Scan and is the answer not in the manual?
Questions and answers