Related Manuals for LEAD FLUID BT100S
Summarization of Contents
4 Display Panel and Operating Keypads
4.1 Keypad
Explains the function of each keypad button for operating the pump.
4.2 Digital Display
Details the various icons and states shown on the pump's LCD screen.
7 Operation Instructions
7.1 Before Operation
Pre-operation checks and considerations for pump setup and installation.
7.2 Power Connection
Steps for correctly connecting the pump to the power supply.
7.3 Mode Change
Instructions on how to switch between different operating modes.
7.4 Internal Control Mode
How to operate the pump using its onboard keypad and external signals.
7.5 External Control Mode
Using external logic and analog signals to control pump direction, start/stop, and speed.
7.6 Time Dispense Mode
Setting up automatic fluid dispensing based on duration, pause, and cycles.
7.7 Logic Level 1 Control Mode (footswitch)
Controlling pump start/stop with external logic signals and keypad for speed/direction.
7.8 Logic Level 2 Control Mode (footswitch and direction switch)
Using external logic signals for start, stop, direction, and keypad for speed.
7.9 Communication Mode
Connecting and controlling the pump via RS485 MODBUS interface.
7.10 Speed Setting
How to adjust and set the pump's rotational speed using the controls.
8 Maintenance
8.1 Warranty
Information regarding the product's one-year labor and parts warranty.
8.2 Regular Maintenance
Recommended procedures for routine maintenance to ensure pump longevity.
8.3 Malfunction Solutions
A guide to identifying and resolving common hardware and software malfunctions.
Need help?
Do you have a question about the BT100S and is the answer not in the manual?
Questions and answers