Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for NOREMAT PRODIGIA 45
Summarization of Contents
General Safety Rules
Contact with Oil Safety
Important safety advice regarding hydraulic oil contact and first aid.
Noise and Dust Precautions
Precautions for noise and dust exposure during operation and travel.
Vibration Exposure Guidelines
Information on worker exposure to vibrations transmitted to the body.
Heat Risks and Protection
Risks associated with heat from hydraulic components and necessary protection.
Machine Delivery Handling
Safety and handling rules to observe during machine delivery.
Pre-Attachment Checks
Checks and precautions required before fitting the machine to the tractor.
Pre-Rotor Start Procedures
Procedures and safety checks to perform before starting the rotor.
Pre-Departure Checks
Essential steps to take before leaving the tractor or allowing access.
Chapter 1: Technical Characteristics
Technical Specifications Overview
Details on power, features, weights, performances, and standard equipment.
Transport of the Machine by Lorry
Loading Procedure
Step-by-step guide for loading the machine onto a lorry.
Unloading Procedure
Step-by-step guide for unloading the machine from a lorry.
Attachment and First-Time Operation
Attachment to Tractor/CV
Ensures machine suitability for the tractor linkage and PTO.
First-Time Operation Guidance
Guidance for initial operation and familiarization for new operators.
Chapter 2: Operation and Maintenance
General Operation Safety
General safety rules and precautions for operating the machine.
Machine Operation Modes
Transport Position
Instructions for securing the machine in transport mode.
Working Position
Guidance on achieving the correct working posture for optimal performance.
Ground Speed Selection
Recommendations for selecting appropriate ground speed based on conditions.
Vibration Information
Information regarding vibrations experienced during machine operation.
Ground Work Procedures
Procedures for working on different ground conditions.
Height Work Guidelines
Guidelines for performing work at various heights.
Machine Description Details
Pressure Adjustment
Details on adjusting hydraulic pressures for machine components.
Bolt Tightening Torques
Specifications for bolt tightening torques based on size and quality.
Machine Greasing
Greasing Recommendations
Essential advice and recommendations for proper greasing of the machine.
Greasing Plan and Intervals
Schedule and points for regular machine greasing.
PTO Driveshaft Greasing
Specific instructions for cleaning and greasing the PTO driveshaft.
Machine Oil Changes and Filters
Oil Change Recommendations
General recommendations and requirements for oil changes.
Hydraulic Circuit Oil Change
Procedure and intervals for hydraulic circuit oil replacement.
Gearbox Oil Change
Steps for changing the gearbox oil for Axiona and Prodigia models.
Oil Filter Cartridge Replacement
Instructions for replacing oil filter cartridges on the machine.
Machine Maintenance
Daily Maintenance Checks
Daily checks and cleaning procedures for the machine.
Rotor Replacement Procedure
Reference to operator's manual for rotor replacement instructions.
Cutting Tool Maintenance
Reference to operator's manual for cutting tool maintenance.
Accumulator Maintenance and Inspection
Information on periodical inspections and tests for accumulators.
Attachment and Removal
Attaching Machine to Tractor
Ensures machine suitability for the tractor linkage, PTO, and weight.
Removing Machine from Tractor
Step-by-step guide for detaching the machine from the tractor.
Machine Storage and Stability
Storage Procedures
Guidelines for storing the machine after use.
Tractor Ballasting Guidelines
Ballasting with Front-End Loader
Advice on tractor ballasting, especially when fitted with a front-end loader.
Machine Warranty Information
Warranty Application Details
Details on warranty coverage, exclusions, and application process.
Need help?
Do you have a question about the PRODIGIA 45 and is the answer not in the manual?
Questions and answers