Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Case 885 Diesel
Summarization of Contents
Brakes
Brake Adjustment
Procedure for adjusting the brake system on all tractor models.
Brake Bleed
Steps for bleeding air from the brake lines on all tractor models.
Master Cylinders
Details on the master cylinders used in the brake system.
Brakes R&R and Overhaul
Instructions for removing, replacing, and overhauling brake components.
Clutch and Engine
Clutch and Engine Adjustment
Procedure for adjusting the clutch and engine components.
Clutch Cylinders
Information regarding the cylinders within the clutch system.
Clutch R&R and Overhaul
Instructions for removing, replacing, and overhauling the clutch assembly.
Cab
Cab Remove and Reinstall
Procedure for removing and reinstalling the tractor cab.
Cooling System
Cooling System Fan
Details and service information for the cooling system fan.
Cooling System Radiator
Information on the radiator, including removal and installation.
Cooling System Water Pump
Procedure for removing, overhauling, and installing the water pump.
Diesel Fuel System
Diesel Fuel System Ether Starting Aid
Instructions for using and testing the ether starting aid system.
Diesel Fuel System Filters and Bleeding
Procedure for changing fuel filters and bleeding the diesel system.
Diesel Fuel System Injection Pump
Service information for the diesel injection pump, including timing.
Diesel Fuel System Nozzles
Details on testing, removing, and overhauling injection nozzles.
Differential Lock
Differential Lock R&R and Overhaul
Procedure for removing, overhauling, and reinstalling the differential lock.
Electrical System
Electrical System Alternator
Service and testing procedures for the alternator.
Electrical System Batteries
Information on checking and maintaining tractor batteries.
Electrical System Charging System
Details on testing and troubleshooting the charging system.
Electrical System Starting Motor
Service information for the starting motor.
Engine
Engine Assembly R&R
Procedure for removing and reinstalling the engine assembly.
Engine Balancer
Service and overhaul procedures for the engine balancer unit.
Engine Cam Followers
Information on servicing engine cam followers.
Engine Camshaft and Bearings
Procedure for removing and installing camshaft and bearings.
Engine Connecting Rods and Bearings
Service procedures for connecting rods and bearings.
Engine Crankshaft and Main Bearings
Details on crankshaft and main bearing service.
Engine Crankshaft Oil Seals
Procedure for replacing crankshaft oil seals.
Engine Cylinder Head
Instructions for removing, overhauling, and reinstalling the cylinder head.
Engine Flywheel
Service information for the engine flywheel.
Engine Injection Timing
Procedure for setting the engine injection timing.
Engine Nozzle Sleeves
Procedure for removing and installing injector nozzle sleeves.
Engine Oil Pan
Procedure for removing and reinstalling the engine oil pan.
Engine Oil Pump
Service information for the engine oil pump.
Engine Piston Pins
Specifications and service for engine piston pins.
Engine Piston Removal
Procedure for removing pistons from the engine.
Engine Pistons, Sleeves and Rings
Service and specifications for pistons, sleeves, and rings.
Engine Rocker Arms
Procedure for removing and servicing engine rocker arms.
Engine Timing Gear Cover
Procedure for removing and reinstalling the timing gear cover.
Engine Timing Gears
Information on timing gears, including alignment and backlash.
Engine Valves and Seats
Service procedures for engine valves and valve seats.
Engine Valve Guides and Springs
Information on servicing valve guides and springs.
Fenders, Fuel Tank and Platform
Fenders, Fuel Tank and Platform Remove and Reinstall
Procedure for removing and reinstalling fenders, fuel tank, and platform.
Final Drive
Final Drive Assemblies R&R
Procedure for removing and reinstalling final drive assemblies.
Final Drive Planetary Carrier
Service procedures for the planetary carrier.
Final Drive Rear Axles
Information on servicing the rear axle components.
Front System (Two-Wheel Drive)
Front System Axle Main Member
Service procedures for the front axle main member.
Front System Front Support
Procedure for removing and reinstalling the front support.
Front System Spindles
Service information for front system spindles.
Front System Tie Rods and Toe-In
Procedure for adjusting tie rods and setting toe-in.
Front System Wheel Bearings
Information on servicing front wheel bearings.
Front-Wheel Drive
Front-Wheel Drive Axle Assembly R&R
Procedure for removing and reinstalling the front-wheel drive axle assembly.
Front-Wheel Drive Differential and Bevel Drive Gears
Service procedures for the differential and bevel drive gears.
Front-Wheel Drive Front Drive Shaft
Procedure for removing and reinstalling the front drive shaft.
Front-Wheel Drive Front Support
Procedure for removing and reinstalling the front support.
Front-Wheel Drive Swivel Housing and Axle Shaft
Service procedures for the swivel housing and axle shaft.
Front-Wheel Drive Tie Rods and Toe-In
Procedure for adjusting tie rods and setting toe-in.
Front-Wheel Drive Transfer Gearbox
Service procedures for the transfer gearbox.
Front-Wheel Drive Wheel Hub and Planetary
Service procedures for the wheel hub and planetary assembly.
Hydraulic System
Hydraulic System Auxiliary Control Valves
Procedure for removing and overhauling auxiliary control valves.
Hydraulic System Filter, Fluid and Pump
Information on filter changes, fluid capacity, and pump service.
Hydraulic System Lift Cylinder and Valve
Service procedures for the lift cylinder and associated valve.
Hydraulic System Raise Rate Valve
Procedure for removing and overhauling the raise rate valve.
Hydraulic System Rockshaft
Service information for the hydraulic system rockshaft.
Hydraulic System R&R Lift Unit
Procedure for removing and reinstalling the hydraulic lift unit.
Hydraulic System Test and Adjust
Procedures for testing and adjusting hydraulic system components.
Hydraulic System Trouble Shooting
Troubleshooting common issues in the hydraulic system.
Hydraulic System Unloading and Flow Control Valve
Procedure for removing and overhauling the unloading and flow control valve.
Main Drive Bevel Gears and Differential
Main Drive Bevel Gears and Differential R&R and Overhaul
Procedure for removing and overhauling the main drive bevel gears and differential.
Power Steering System
Power Steering System Cylinder
Service procedures for the power steering cylinder.
Power Steering System Flow Divider
Information on the power steering flow divider.
Power Steering System Flow and Pressure Tests
Procedures for testing power steering flow and pressure.
Power Steering System Lubrication and Bleeding
Procedures for lubricating and bleeding the power steering system.
Power Steering System Oil Cooler
Service information for the power steering oil cooler.
Power Steering System Operation
Description of how the power steering system operates.
Power Steering System Pump
Service procedures for the power steering system pump.
Power Steering System Steering Hand Pump
Service procedures for the steering hand pump.
Power Take-Off
Power Take-Off Clutch, Shafts and Gears
Service procedures for PTO clutch, shafts, and gears.
Power Take-Off Linkage Adjustment
Procedure for adjusting the PTO linkage.
Power Take-Off Operating Pressure
Procedure for testing PTO operating pressure.
Transmission, Forward-Reverse
Forward-Reverse Transmission Operation
Description of the operation of the Forward-Reverse transmission.
Forward-Reverse Transmission Regulator (Control) Valve
Service procedures for the regulator (control) valve.
Forward-Reverse Transmission R&R and Overhaul
Procedure for removing and overhauling the transmission.
Forward-Reverse Transmission Trouble Shooting
Troubleshooting common issues with the transmission.
Transmission, Two Speed Powershift
Two Speed Powershift Operation
Description of the operation of the two speed powershift.
Two Speed Powershift Regulator (Control) Valve
Service procedures for the powershift regulator valve.
Two Speed Powershift R&R and Overhaul
Procedure for removing and overhauling the powershift unit.
Transmission, Range
Range Transmission R&R and Overhaul
Procedure for removing and overhauling the range transmission.
Range Transmission Transfer Lube Pump
Procedure for removing and reinstalling the transfer lube pump.
Transmission, Synchromesh (Speed)
Synchromesh Transmission R&R and Overhaul
Procedure for removing and overhauling the synchromesh transmission.
Condensed Service Data
Condensed Service Data General
General specifications and data for tractor models.
Condensed Service Data (Continued)
Condensed Service Data Tune-Up
Tune-up specifications for tractor models.
Condensed Service Data Firing Order
Firing order specifications for tractor engines.
Condensed Service Data Valve Tappet Gap (Hot), Intake and Exhaust
Valve tappet gap specifications for intake and exhaust valves (hot).
Condensed Service Data Valve Face Angle
Valve face angle specifications for engine valves.
Condensed Service Data Valve Seat Angle
Valve seat angle specifications for engine valves.
Condensed Service Data Injection Pump Make
Information on the make of the injection pump.
Condensed Service Data Injection Pump Timing
Specifications for injection pump timing.
Condensed Service Data Engine Low Idle - RPM (No Load)
Engine low idle speed specifications.
Condensed Service Data Engine High Idle - RPM (No Load)
Engine high idle speed specifications.
Condensed Service Data Engine Full Load - RPM
Engine full load speed specifications.
Condensed Service Data Sizes-Clearances-Capacities
Specifications for component sizes, clearances, and capacities.
Condensed Service Data (Continued)
Condensed Service Data Sizes-Clearances-Capacities (Continued)
Further specifications for component sizes, clearances, and capacities.
Front Axle (Two-Wheel Drive)
Front Axle Front Wheel Bearing
Procedure for servicing the front wheel bearing assembly.
Front Axle Spindles
Procedure for removing and installing front axle spindles.
Front Axle (Two-Wheel Drive) - Nonadjustable Cast Axle
Front Axle Spindles (Nonadjustable Cast Axle)
Procedure for removing and installing spindles on nonadjustable axles.
Axle Main Member and Pivot Pin
Axle Main Member and Pivot Pin (Adjustable Axles)
Procedure for removing and reinstalling axle main member with adjustable axles.
Axle Main Member and Pivot Pin (Nonadjustable Cast Axle)
Procedure for removing and reinstalling axle main member with nonadjustable axles.
Tie Rods and Toe-In
Tie Rods and Toe-In (Two-Wheel Drive Models)
Procedure for adjusting tie rods and toe-in on two-wheel drive models.
Front Support
Front Support (Two-Wheel Drive Models)
Procedure for removing and reinstalling the front support.
Drive Axle Assembly and Front Support
Drive Axle Assembly and Front Support (All Models)
Procedure for removing and reinstalling drive axle assembly and front support.
Wheel Hub and Planetary
Wheel Hub and Planetary (All Models)
Procedure for removing and overhauling wheel hub and planetary.
Swivel Housing and Axle Shaft
Swivel Housing and Axle Shaft (All Models)
Procedure for removing and overhauling swivel housing and axle shaft.
Differential and Bevel Drive Gears
Differential and Bevel Drive Gears (All Models)
Procedure for removing and overhauling differential and bevel drive gears.
Differential Type One
Disassembly and service procedures for the Type One differential unit.
Differential Type Two
Disassembly and service procedures for the Type Two differential unit.
Front Drive Shaft and Shield
Front Drive Shaft and Shield (All Models)
Procedure for removing and reinstalling the front drive shaft and shield.
Transfer Gearbox
Transfer Gearbox (Mechanical Shift)
Service procedures for the mechanical shift transfer gearbox.
Transfer Gearbox (Electric/Hydraulic Shift)
Service procedures for the electric/hydraulic shift transfer gearbox.
Tie Rods and Toe-In
Tie Rods and Toe-In (Front Drive Axle Models)
Procedure for adjusting tie rods and toe-in on front drive axle models.
Power Steering System
Power Steering System Lubrication and Bleeding
Procedures for lubricating and bleeding the power steering system.
Steering Circuits
Description of the steering circuits and their operation.
Power Steering System - Hydrostatic Steering Tests
Hydrostatic Steering Tests - Priority Flow Divider
Testing procedures for the priority flow divider valve.
Hydrostatic Steering Tests - Steering Hand Pump
Testing procedures for the steering hand pump.
Power Steering System - Hydraulic Pump
Hydraulic Pump (All Models)
Information on hydraulic pump types and specifications.
Steering Cylinder
Steering Cylinder (Adjustable Front Axle Models)
Procedure for removing and overhauling steering cylinders on adjustable axle models.
Steering Cylinder (Nonadjustable Cast Axle Models)
Procedure for removing and overhauling steering cylinders on nonadjustable axle models.
Steering Cylinder (Front Drive Axle Models)
Procedure for overhauling steering cylinders on front drive axle models.
R&R Engine Assembly
R&R Engine Assembly (All Models)
Procedure for removing and reinstalling the engine assembly.
Cylinder Head
Cylinder Head (All Models)
Procedure for removing and reinstalling the cylinder head.
Nozzle Sleeves
Nozzle Sleeves (All Models)
Procedure for removing and reinstalling nozzle sleeves.
Valves and Seats
Valves and Seats (All Models)
Specifications and service for engine valves and seats.
Valve Tappets (Cam Followers)
Valve Tappets (Cam Followers) (All Models)
Specifications and procedures for servicing valve tappets.
Valve Tappet Levers (Rocker Arms)
Valve Tappet Levers (Rocker Arms) (All Models)
Procedure for removing and servicing rocker arms and shaft.
Timing Gear Cover
Timing Gear Cover (All Models)
Procedure for removing and reinstalling the timing gear cover.
Timing Gears
Timing Gears (All Models)
Information on timing gears, including alignment and backlash.
Timing Gears Crankshaft Gear
Procedure for removing and installing the crankshaft gear.
Timing Gears Camshaft Gear
Procedure for removing and installing the camshaft gear.
Timing Gears Idler Gear
Procedure for removing and installing the idler gear.
Camshaft and Bearings
Camshaft and Bearings (All Models)
Procedure for removing and installing the camshaft and bearings.
Camshaft Bearings
Procedure for removing and installing camshaft bearings.
Rod and Piston Units
Rod and Piston Units (All Models)
Procedure for removing connecting rod and piston assemblies.
Pistons, Sleeves and Rings
Pistons, Sleeves and Rings (All Models)
Specifications and service for pistons, sleeves, and rings.
Piston Pins
Piston Pins (All Models)
Specifications and service for piston pins.
Connecting Rods and Bearings
Connecting Rods and Bearings (All Models)
Procedure for removing and installing connecting rod bearings.
Crankshaft and Main Bearings
Crankshaft and Main Bearings (All Models)
Procedure for servicing crankshaft and main bearings.
Crankshaft Seals
Crankshaft Seals - Front
Procedure for removing and installing the front crankshaft seal.
Crankshaft Seals - Rear
Procedure for removing and installing the rear crankshaft seal.
Flywheel
Flywheel (All Models)
Procedure for removing and installing the flywheel.
Engine Balancer
Engine Balancer (Models So Equipped)
Procedure for removing and overhauling the engine balancer.
Oil Pump and Relief Valve
Oil Pump and Relief Valve (All Models)
Procedure for removing and servicing the oil pump and relief valve.
Oil Pan
Oil Pan (All Models)
Procedure for removing and reinstalling the oil pan.
Filters and Bleeding
Filters and Bleeding (All Models)
Procedure for changing fuel filters and bleeding the system.
Injection Pump
Injection Pump (All Models)
Service information for the injection pump, including timing.
Injection Pump Control Adjustments
Injection Pump Control Adjustments Low and High Idle
Procedure for adjusting low and high idle engine speeds.
Injection Nozzles
Injection Nozzles (All Models)
Testing, removing, and overhauling injection nozzles.
Injection Nozzles Testing and Locating Faulty Nozzle
Procedure for testing and identifying faulty injection nozzles.
Injection Nozzles Remove and Reinstall
Procedure for removing and reinstalling injection nozzles.
Injection Nozzles Overhaul
Procedure for overhauling injection nozzles.
Ether Starting Aid
Ether Starting Aid (All Models)
Instructions for using and testing the ether starting aid system.
Cooling System
Cooling System Radiator
Procedure for removing and reinstalling the radiator.
Thermostat
Thermostat (All Models)
Information on the thermostat's operation and temperature range.
Water Pump
Water Pump R&R and Overhaul (All Models)
Procedure for removing and overhauling the water pump assembly.
Electrical System
Electrical System Batteries
Procedures for checking battery condition and connections.
Electrical System Battery Current Drain Test
Procedure for checking for current drain when the tractor is not in use.
Charging System
Charging System Testing
General testing procedures for the charging system.
Charging System Warning Light Circuit Test
Procedure for testing the alternator warning light circuit.
Charging System Alternator Voltage Output Test
Procedure for testing the alternator voltage output.
Alternator
Alternator Voltage Regulator Bypass Test
Procedure for bypassing the voltage regulator to test it.
Alternator Amperage Test
Procedure for testing the alternator's amperage output.
Alternator (Lucas alternators)
Specifications and details for Lucas alternators.
Alternator - Lucas A115-45
Alternator (Lucas A115-45) Disassembly
Procedure for disassembling the Lucas A115-45 alternator.
Alternator - Lucas A127-45 and A127-65
Alternator (Lucas A127-45 and A127-65) Disassembly
Procedure for disassembling Lucas A127-45 and A127-65 alternators.
Alternator Testing
Testing procedures for alternator components.
Starting Motor
Starting Motor Lucas Starter
Service information for Lucas starters.
Starting Motor Lucas Starter Disassembly and Testing
Procedure for disassembling and testing Lucas starters.
Starting Motor - Lucas Starter
Starting Motor Lucas Starter Disassembly and Testing
Procedure for disassembling and testing Lucas starters.
Starting Motor Field Coil Test
Procedure for testing field coil insulation.
Starting Motor Insulated Brush Box Test
Procedure for testing insulated brush boxes.
Starting Motor Reassembly
Procedure for reassembling the starter motor.
Starting Motor - Bosch Starter
Starting Motor Bosch Starter Disassembly and Testing
Procedure for disassembling and testing Bosch starters.
Clutch Adjustment
Clutch Adjustment (Models Without Cab)
Procedure for adjusting clutch linkage on models without cab.
Clutch Pedal Height
Clutch Pedal Height (Models Without Cab)
Procedure for adjusting clutch pedal height on models without cab.
Clutch Pedal Height (Models With Cab)
Procedure for adjusting clutch pedal height on models with cab.
Bleed Clutch System
Bleed Clutch System
Procedure for bleeding air from the clutch system.
R&R and Overhaul Clutch
R&R and Overhaul Clutch (All Models)
Procedure for removing and overhauling the engine clutch.
Two Speed Power Shift
Two Speed Power Shift Operation
Description of the operation of the two speed powershift unit.
Regulator (Control) Valve
Regulator (Control) Valve (Models So Equipped)
Procedure for removing and overhauling the regulator valve.
Power Shift Unit
Power Shift Unit (Models So Equipped)
Procedure for removing and overhauling the power shift unit.
Forward-Reverse Transmission
Forward-Reverse Transmission Operation
Description of the operation of the Forward-Reverse transmission.
Forward-Reverse Transmission Trouble Shooting
Troubleshooting common issues with the transmission.
Regulator Valve
Regulator Valve (Models So Equipped)
Procedure for removing and overhauling the regulator valve.
Regulator Valve Pressure Test and Adjust
Procedure for testing and adjusting regulator valve oil pressure.
Forward-Reverse Unit
Forward-Reverse Unit (Models So Equipped)
Procedure for removing and overhauling the Forward-Reverse unit.
Range Transmission
Range Transmission R&R and Overhaul
Procedure for removing and overhauling the range transmission.
Range Transmission Models 385-485 (Two-Wheel Drive)
Specific procedures for two-wheel drive models 385-485.
Range Transmission Models 585-685-885 (Two-Wheel Drive) and All Models (Four-Wheel Drive)
Procedures for two-wheel drive models 585-885 and all four-wheel drive models.
Transfer Lube Pump
Transfer Lube Pump (All Models)
Procedure for removing and reinstalling the transfer lube pump.
Main Drive Bevel Gears and Differential
R&R and Overhaul Differential (All Models)
Procedure for removing and overhauling the differential assembly.
Differential Lock
Differential Lock (All Models)
Information on the differential lock mechanism.
Differential Lock R&R and Overhaul
Procedure for removing and overhauling the differential lock.
Park Brake
Park Brake Adjustment (All Models)
Procedure for adjusting the park brake linkage.
Final Drive
Final Drive Remove and Reinstall (All Models)
Procedure for removing and reinstalling the final drive assembly.
Final Drive Overhaul Rear Axle and Ring Gear
Procedure for overhauling the rear axle and ring gear.
Brakes
Brake Adjustment (All Models)
Procedure for adjusting the brake pedal height.
Bleed Brakes
Bleed Brakes (All Models)
Procedure for bleeding air from the brake system.
Brake Master Cylinders
Brake Master Cylinders (All Models)
Procedure for removing and overhauling brake master cylinders.
PTO Linkage Adjustment
PTO Linkage Adjustment (All Models)
Procedure for adjusting the PTO linkage.
Operating Pressure Test
Operating Pressure Test (All Models)
Procedure for checking PTO operating pressure.
PTO Clutch, Shafts and Gears
PTO Clutch, Shafts and Gears (All Models)
Procedure for removing and overhauling PTO clutch, shafts, and gears.
Hydraulic Lift System
Hydraulic Lift System Trouble Shooting
Troubleshooting common issues in the hydraulic lift system.
Hydraulic Lift System Test and Adjust
Procedures for testing and adjusting hydraulic lift system components.
Quadrant Levers Friction Adjustment
Quadrant Levers Friction Adjustment (Models Equipped with Cab)
Procedure for adjusting control lever friction on models with cab.
Quadrant Levers Friction Adjustment (Models Without Cab)
Procedure for adjusting control lever friction on models without cab.
Control Lever Position
Control Lever Position (Models Equipped with Cab)
Procedure for setting control lever position on models with cab.
Control Lever Position (Models Without Cab)
Procedure for setting control lever position on models without cab.
Hitch Adjustments
Hitch Adjustments (All Models)
General procedures for hitch adjustments.
Position Control Lever
Procedure for adjusting the position control lever.
Draft Control Lever
Procedure for adjusting the draft control lever.
Unloading and Flow Control Valve
Unloading and Flow Control Valve (All Models)
Procedure for removing and overhauling the unloading and flow control valve.
Hydraulic Lift Housing
Hydraulic Lift Housing (Models Without Cab)
Procedure for removing and reinstalling the hydraulic lift housing.
Hydraulic Lift Housing (Models With Cab)
Procedure for removing and reinstalling the hydraulic lift housing.
Cylinder and Valve Unit
Cylinder and Valve Unit (All Models)
Procedure for removing and overhauling the work cylinder and valve assembly.
Raise Rate Valve
Raise Rate Valve (All Models)
Procedure for removing and overhauling the raise rate valve.
Rockshaft
Rockshaft (All Models)
Procedure for removing and reinstalling the rockshaft.
Filter, Fluid and Pump
Filter, Fluid and Pump (All Models)
Information on filter change and hydraulic fluid capacity.
Auxiliary Control Valve
Auxiliary Control Valve (All Models So Equipped)
Procedure for removing and overhauling auxiliary control valves.
Fenders, Fuel Tank and Platform
Fenders, Fuel Tank and Platform Remove and Reinstall (Models Without Cab)
Procedure for removing and reinstalling fenders, fuel tank, and platform on non-cab models.
Cab
Cab Remove and Reinstall (Models So Equipped)
Procedure for removing and reinstalling the tractor cab.
Need help?
Do you have a question about the 885 Diesel and is the answer not in the manual?
Questions and answers