Related Manuals for Vidos ZS30
Summarization of Contents
Installation
Attention items of disassembly (ZS10/ZS30)
Specific instructions for safely disassembling the ZS10/ZS30 models, emphasizing careful removal of covers.
Operation
Access mode setting
Configure how users can access the system, choosing between card, code, or combined access methods.
Set the length of passwords
Define the digit length for user passwords and codes, impacting security and entry.
Add the user card and code(ZONE 1)
Register new user cards and associate them with specific codes for access control in ZONE 1.
Delete the user card and code(ZONE 1)
Remove registered user cards and their associated codes from ZONE 1's access control system.
Add the user card or code(ZONE 2)
Register user cards or codes for access control in ZONE 2, with limited capacity.
Delete the user card or code(ZONE 2)
Remove registered user cards or codes from ZONE 2's access control system.
Set the unlocking time for ZONE 1
Configure the delay time for lock release and re-locking for ZONE 1 access.
Set the unlocking time for ZONE 2
Configure the delay time for lock release and re-locking for ZONE 2 access.
Clean all user cards and codes, restores to factory defaults
Reset all stored user data and restore the device to its original factory settings.
The pickproof alarm
Details the built-in anti-tamper alarm triggered by the photoresistor sensor.
Modify administrator code
Change the administrator code to enhance security and control system access.
Turn on/off the pickproof alarm
Enable or disable the pickproof alarm feature to prevent tampering.
Turn on/off the door bell
Control the functionality of the door bell, including its activation and deactivation.
Add the master card(only for ZONE 1)
Register a master card to manage system settings and access control for ZONE 1.
Using the master card enter the setting mode
Procedure for accessing the system's settings menu using the master card.
Group cards added in ZONE 1
Efficiently add multiple user cards in a group to ZONE 1 storage units.
Modify the user code of ZONE 1
Update or change the existing user codes associated with access in ZONE 1.
Setting access control ID(for networked modes only)
Configure a unique ID for the access control unit when operating in networked environments.
Need help?
Do you have a question about the ZS30 and is the answer not in the manual?
Questions and answers