Details Of Programming; Technical Details - Beltronics Vector 955 Owner's Manual

Details of Programming

City Mode Sensitivity
City STD (Standard)
In this setting,when you put your V955 in
the City mode,X-band sensitivity is
significantly reduced,to reduce annoyance
from X-band intrusion alarms and motion
sensors.(factory default)
City LoX (Low X band sensitivity)
In this setting,when you put your V955 in
the City mode,X-band sensitivity is reduced
more than the standard setting.This will
reduce X-band alarms from other sources
even further,but also significantly reduces
range to X-band traffic radar.
City NoX (No X-band sensitivity)
In this setting,when you put your V955 in
the City mode,V955 will not respond to
any X-band signals.
WARNING: Only choose this setting
if you are absolutely certain that
there are no X-band traffic radar
units where you drive.
NOTE: These settings only apply
when the V955 is operated in City
mode. X-band sensitivity is not
affected when used in "AutoScan"
or "Highway" modes.
Bands
BandsDFT
In this setting,all North American radar and
laser frequencies are monitored.This is the
factory setting and it is recommended that
you use your V955 in this mode.
BandsMOD
In this setting,your V955 will warn you
with an audible alert,and associated text
message stating which band has changed
from the original factory setting (i.e."SWS
ON").This warning is displayed during the
start up sequence (standard or fast).
14

Technical Details

Features and Specifications
Operating Bands
• X-band 10.525 GHz ± 25 MHz
• K-band 24.150 GHz ± 100 MHz
• Ka-band 34.700 GHz ± 1300 MHz
• Laser 904nm,33 MHz bandwidth
Radar Receiver / Detector Type
• Superheterodyne,VTO
• Scanning Frequency Discriminator
• Digital Signal Processing (DSP)
Laser Detection
• Quantum Limited Video Receiver
• Multiple Laser Sensor Diodes
Display Type
• 280 LED Alphanumeric
• Bar Graph
• 3 Levels of Brightness,plus Dark Mode
Power Requirement
• 12VDC,Negative Ground
• Power cord (included)
Programmable Features
• Power-On Indication
• Voice Alerts
• Power-On Sequence
• AutoMute
• City Mode Sensitivity
• Bands
Sensitivity Control
• Highway,AutoScan and City
Auto Calibration Circuitry
VG2 Immunity
Dimensions (Inches)
• 1.25 H x 2.75 W x 4.75 L
15