Related Manuals for InoTec CLS-MTB
Summarization of Contents
General Information
Explanation of symbols
Explains safety and information symbols used in the manual.
Liability and warranty
Details INOTEC's warranty limitations and conditions for product use.
Spare parts
Specifies the requirement to use only original INOTEC spare parts for replacements.
Disposal
Provides guidance on the proper disposal of batteries and electronic components.
Correction of faults
Explains the need for a function test after correcting faults to clear error messages.
Safety instructions
Operating instructions
Emphasizes reading the manual for safety, usage, and maintenance before installation.
Repairs
States that repairs must only be performed by authorized INOTEC personnel.
Transport and storage
Examination on delivery
Instructs to check for completeness and damage upon delivery and report immediately.
Storage
Provides storage guidelines for the device, including keeping it dry and dust-free.
Product description
Mimic panel layout
Details the physical components and layout of the mimic panel.
Installation
Device
Explains how to unpack and open the device housing for installation.
Electrical connection
Details the connection of the power supply for 230V AC or 24V DC operation.
Commissioning the mimic panel
Switching on the CPS mimic panel
Instructs to connect the system and switch on the mains voltage.
Switching off the CPS mimic panel
Explains how to switch off the mains voltage to the mimic panel.
Delivery condition
Lists the default factory settings for password, remote switch, and tests.
Operation
Status LEDs
Explains the status indicated by the three status LEDs and the OLED display.
Resetting
Buzzer
Details how the buzzer signals faults and how to turn it off.
Manual release
Explains how to centrally acknowledge manual release after a power failure.
Information
Data line information/address configuration
Guides on viewing or configuring data line address assignments.
Address/circuit/luminaire status
Details how to query the status of connected systems, circuits, and luminaires.
Programming
Date/time
Explains how to set the date, time, and weekday for accurate testing.
Troubleshooting
Communication failures
Provides steps to troubleshoot communication errors between the panel and devices.
Product description
Mimic panel layout
Details the physical components and layout of the CLS mimic panel.
Installation
Device
Explains how to unpack and open the CLS device housing for installation.
Electrical connection
Details the power supply connection for 230V AC or 24V DC for the CLS panel.
Commissioning the mimic panel
Switching on the CLS mimic panel
Instructs to connect the CLS system and switch on the mains voltage.
Switching off the CLS mimic panel
Explains how to switch off the mains voltage to the CLS mimic panel.
Delivery condition
Lists the default factory settings for password, remote switch, and tests for CLS.
Operation
Status LEDs
Explains the status indicated by the three LEDs and OLED display on the CLS panel.
Resetting
Buzzer
Details the buzzer's fault signaling and how to silence it.
Manual release
Explains how to centrally acknowledge manual release for CLS systems after power restoration.
Information
Data line information/address configuration
Guides on configuring or viewing data line address assignments for CLS.
Address/circuit/luminaire status
Details querying the status of CLS systems, circuits, and luminaires.
Programming
Date/time
Explains setting date, time, and weekday for CLS panel for accurate testing.
Troubleshooting
Communication failures
Provides steps to troubleshoot CLS communication errors with the mimic panel.
Product description
BNS - Mimic panel layout
Details the physical components and layout of the BNS mimic panel.
Installation
Device
Explains how to unpack and open the BNS device for installation.
Electrical connection
Details the power supply connection for 230V AC or 24V DC for the BNS panel.
INOSTICK
Saving (text file)
Guides on saving configurations, luminaire info, and logbooks as text files to INOSTICK.
Commissioning the mimic panel
Switching on the BNS mimic panel
Instructs to connect and switch on the BNS system's mains voltage.
Switching off the BNS mimic panel
Explains how to switch off the mains voltage to the BNS mimic panel.
Delivery condition
Lists default factory settings for password, remote switch, and tests for BNS.
Operation
Status LEDs
Explains the status indicated by the three LEDs and OLED display on the BNS panel.
Information
Luminaire status
Explains how to view the current status and battery duration of a selected BNS luminaire.
Programming
Function test
Describes configuring automatic function tests for BNS systems based on time and day.
BNS
BNS-MTB Settings
Configures BNS-MTB settings, including RTG address and language.
Luminaire
Autom. assignment
Explains automatic detection and storage of connected BNS luminaires.
INOSTICK
Saving (text file)
Guides on saving configurations, luminaire info, and logbooks as text files to INOSTICK.
Need help?
Do you have a question about the CLS-MTB and is the answer not in the manual?
Questions and answers