Table of Contents
Advertisement
Operating Instructions and Spare Parts
List for Suspended Pit Jacks
Original Operating Instructions in German
Series:
GHUSE / GHUSLE
Series:
GWS 2 / GWUS 2
Series:
GWSK 2 / GWSKT / GWSKTA
Series:
GH / GHL – GHS / GHSL
GHUS / GHUSL / GHUST
GHSP / GHLP
GHUSP / GHUSLP / GHUSTP
Series:
GHUSKTP
Series:
Blitz S 15 Vario
Type
Serial number
Date
Rev. 0 126867 06/2018
Advertisement
Table of Contents
Related Manuals for Blitz GH Series
Summarization of Contents
Overview of the Series
Component overview for all series
Provides a numbered list of components with a diagram for general reference.
1 Basic Safety Instructions
1.1 Intended Use
Specifies the intended purpose and limitations of the jack.
1.2 Basic Measures
Outlines essential safety rules for operating the lift.
1.3 Safety-relevant Components
Lists critical safety features of the hydraulic and pneumatic systems.
1.4 Explanation of Notes
Defines warning symbols and their meanings (DANGER, WARNING, CAUTION).
4 Transport, Installation and Assembly
4.1 Make the Lifting Cylinder ready for Operation
Details steps to prepare the lifting cylinder for use, with diagrams.
4.2 Install and assemble Jack
Instructions for installing and assembling the jack, including undercarriage types.
4.3 Compressed Air Supply
Details the requirements for compressed air supply to the jack.
4.4 Electrical Connection
Specifies the electrical connection requirements and safety precautions.
6 Operation
6.1 Load Handling Device
Information on using support plates, extensions, and lifting vehicles.
6.2 Supporting Bridges and Trestles
Guidelines for using supporting bridges and trestles for safe operation.
6.3 Hazard Statements
Lists various hazard warnings and their corresponding safety instructions.
6.4 Lift, lower and transport Loads
Detailed procedures for lifting, lowering, and transporting loads safely.
7 Maintenance and Repair
7.1 Maintenance Intervals
Specifies weekly, annual, and 5-year maintenance tasks.
7.2 Perform Function Test
Instructions for conducting functional tests on the jack.
7.3 Check Compressed Air Supply
Procedure to check the compressed air supply system.
7.4 Top up Anti-Rust Oil
Instructions for refilling anti-rust oil using an oil pump.
7.5 Check the Hydraulic Oil Level
Steps to check and maintain the hydraulic oil level.
7.6 Perform Safety Test
Details the requirements and procedures for performing a safety test.
7.7 Changing the Hydraulic Oil
Steps for draining and refilling hydraulic oil for load stroke and retrieval.
7.8 Replace Hydraulic Hoses
Procedure for replacing hydraulic hoses, including disconnection and bleeding.
7.9 Drain the Condensate
Instructions on how to drain condensate from the hydraulic system.
7.10 Bleed the Jack
Steps to bleed the jack after maintenance or oil change.
7.11 Clean or replace the Pneumatic Control Valve
Detailed instructions for cleaning or replacing the pneumatic control valve.
7.12 Replace Hydraulic Block
Procedure for replacing the hydraulic block, including disconnections and bleeding.
11 Spare Parts Lists
Adhesive labels
Lists adhesive labels and part numbers for various components.
Need help?
Do you have a question about the GH Series and is the answer not in the manual?
Questions and answers