10 Technical Specifications - Martin Audio WT UB Manual

<
CONTENTS
10
WTUB
TYPE
FREQUENCY RESPONSE (1)
DRIVERS
RATED POWER (2)
RECOMMENDED AMPLIFIER
SENSITIVITY (3)
MAXIMUM SPL (4)
IMPEDANCE
DISPERSION (-6dB)
CROSSOVER
ENCLOSURE
FINISH
PROTECTIVE GRILLE
CONNECTORS
FITTINGS
DIMENSIONS
WEIGHT
SHIPPING DIMENSIONS
SHIPPING WEIGHT
3. Measured in half space conditions at 2 metres with 1 watt input, using band limited pink noise,
4. Measured in half space conditions at 2 metres using band limited pink noise, then
Due to our policy of continuous improvement all specifications are subject
to change without notice.
All material © 2007. Martin Audio Ltd. Subject to change without notice.
>
PRINT
TECHNICAL SPECIFICATIONS
1. Measured on-axis in half space at 2 metres, then referred to 1 metre.
2. AES Standard ANSI S4.26-1984.
then referred to 1 metre.
Martin Audio – WT UB
Two-way passive, reflex enclosure
80Hz-18kHz ± 3dB
2 x 6.5" (165mm) bass mid drivers
with 1.5'' (38mm) voice coil
3 x 1" (25mm) soft dome HF line array
200W AES, 800W peak
200-400W into 4 ohms
93dB 1 Watt/1 metre
115dB continuous, 121dB peak
8 ohms nominal
120˚ horizontal, 40˚ vertical
1.2kHz passive
16 litre (0.6 cu foot) multi-laminate
birch ply
Textured black paint
Black perforated steel
2 x Neutrik NL4 switchable for
input +1, -1 or +2, -2
2 x M8 threaded inserts for
dedicated bracket
1 x M8 insert for safety point
1 x pole mount socket
(W)480mm x (H)212mm x (D)342mm
(W)18.9ins x (H)8.4ins x (D)13.5ins
12kg (26.4 lbs)
(W) 560mm x (H) 320mm x (D) 410mm
(W) 22ins x (H)12.5ins x (D)16.1ins
16kg (35.3lbs)
Notes
referred to 1 metre.
7
GUIDES