Table of Contents

Advertisement

These systems are packaged to include one or several label heads as well
as a conveyor and may contain several options such as status light tower,
transparent label detectors, etc.
Some of the options described in this manual may not apply to your equipment.
Operator and parts manual - 2013
OPERATOR AND PARTS MANUAL
HMI Password: 12345678
Adv. Settings: 222183600

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Lance and is the answer not in the manual?

Questions and answers

Summarization of Contents

Manual Preface and Machine Identification
General Equipment Description
Provides an overview of the NITA labeling system, its features, and benefits.
What is a Labeling System?
Explains the general purpose and functionality of a labeling system in manufacturing.
Warnings and Caution Information
Machine Use Disclaimer
Outlines the intended use of the equipment and disclaims liability for misuse.
Essential Safety Precautions
Provides essential safety instructions and precautions for operating and maintaining the equipment.
Product Introduction
Joust Series Overview
Introduces the JOUST system, its configuration, and capabilities.
Shellshock (SSK) System
Describes the Shellshock system, its unique C-shaped application, and uses.
Joust/Shellshock Combo System
Explains the Joust/Shellshock combo system with dual labeling heads and split belts.
Lance Top System
Details the Lance top system, its single labeling head, and full-width belt configuration.
Lance Bottom System
Describes the Lance bottom system with a labeling head mounted on the bottom split belt.
Shellshock with Servo Closer 360
Introduces the Shellshock with servo closer for band-shaped label application.
Equipment Component Breakdown
Lists the three major component groups that make up the equipment.
Direction of Travel
Illustrates the different possible directions of product travel through the system.
System Setup and Configuration
Main Control Panel and HMI Interface
Introduces the main control panel and its HMI touch screen interface for system operation.
Labeling Head Setup: Roll Loading and Sensors
Guides on loading label rolls and configuring GAP and product sensors.
Labeling Head Positioning Adjustments
Explains vertical, lateral, angle, and peel plate adjustments for precise label placement.
Conveyor and Guide Rail Adjustments
Covers adjustments for side guide rails, top retaining guides, and conveyor settings.
Special Option Adjustments
Details setup for Shell Shock and Servo Closer options for specific label applications.
HMI Touch Screen Interface
HMI Navigation and Overview
Guides users through the HMI interface, including start-up and main screens.
Labeler Screen Settings and Operation
Details HMI screens for labeler setup, including normal/3-panel modes and offsets.
Normal Mode Offset Settings
Covers label flag, position, and gap settings for normal label application mode.
3 Panels Mode Offset Settings
Details label positioning settings specific to the 3 Panels mode.
Production Menu, Conveyor, and Recipe Management
Explains HMI screens for production, conveyor control, and recipe operations.
System Configuration and Advanced Settings
Covers system configuration, advanced settings, and specific labeler node parameters.
Alarm Screen Information
Provides details on temperature, emergency stop, and label out alarms.
Information Screens
Labeler #1 (Node 1) Status
Displays status information and parameters for Labeler #1.
Maintenance Procedures
Labeling Head Maintenance
Maintenance procedures specifically for the labeling head components.
Roller Cleaning and Maintenance
Daily cleaning and maintenance guidelines for the labeling head rollers.
Sensor Cleaning
Procedures for cleaning and maintaining the optical sensors.
Conveyor Belt Cleaning
Maintenance advice for keeping the conveyor belt clean and operational.
Vent and Filter Cleaning
Guidance on cleaning filters and maintaining ventilation for the electrical panel.

Table of Contents