Related Manuals for KUHN WMU 230
Summarization of Contents
Safety Information
Designated Machine Use
Defines the intended purpose and limitations of the shredder for safe operation.
General Safety Recommendations
Provides overarching safety guidelines for tractor and machine operation.
Basic Safety Principles
Outlines fundamental safety principles including legislation and machine advice.
Specific Safety Instructions
Detailed safety instructions covering operator actions, machine checks, and hazard avoidance.
Safety Decals
Understanding Safety Decals
Explains the meaning of various safety decals found on the machine.
Technical Specifications
Shredder Model Specifications
Detailed technical specifications for WMU 210, 230, 265, and 305 shredder models.
Fitting and Adjustments
Fitting Wheels or Roller
Instructions for fitting the gauge roller or gauge wheels to the shredder.
Adjusting Wheel Track
How to adjust the track width of the gauge wheels for optimal performance.
Adjusting Working Height
Procedures for setting the correct working height of the shredder.
Adjusting Rear Cover
How to adjust the opening and closing positions of the rear cover.
Gauge Wheel Height Adjustment
Specific steps for adjusting working height with gauge wheels.
Tractor Adaptation
Tractor Hitch and Top Link Connection
Connecting the shredder to the tractor's 3-point hitch and top link.
PTO Shaft Connection
Steps for correctly connecting the PTO shaft between the machine and tractor.
Machine Offsetting
Mechanical Parallelogram Offsetting
Instructions for adjusting the machine's sideways position using mechanical means.
Hydraulic Parallelogram Offsetting
Procedures for adjusting sideways position using an optional hydraulic system.
PTO Transmission Shaft
Connecting the PTO Shaft
Guides on how to connect the PTO shaft correctly and ensure proper length.
Rotor Speed
Setting Rotor Speed
How to set the pulleys for different PTO speeds (540/1000 rpm).
Optional Accessories
Optional Collecting Rake
Information on the optional collecting rake attachment and its part numbers.
Optional Rear Gauge Wheels
Details about optional rear gauge wheels and their part numbers.
Optional Hydraulic Offsetting
Information on the optional hydraulic parallelogram offsetting system.
Maintenance and Lubrication
Machine Lubrication
Lubrication points and schedule for the PTO shaft, gearbox, and bearings.
Belt Tension Adjustment
How to check and adjust the belt tension for optimal drive performance.
Hammer Knife Procedures
Fitting Hammer Knives
Step-by-step guide for installing hammer knives, including weighing and torque specifications.
Checking Hammer Knife Axle Wear
How to inspect hammer knives and mounting axles for wear and damage.
Operating Advice
Operating Advice and Best Practices
Recommendations for safe and efficient operation, including speed, cornering, and maintenance checks.
Troubleshooting
Troubleshooting Common Problems
A guide to diagnose and resolve common issues like vibration, shredding quality, and heating.
Sound Levels
Machine Sound Level Data
Presents measured sound emission levels for the tractor and the machine.
Limited Warranty
Warranty Exclusions and Limitations
Lists parts and conditions not covered by the manufacturer's limited warranty.
Customer Responsibilities for Warranty
Outlines customer responsibilities for maintenance, transportation, and dealer costs.
Warranty Compliance Provisions
Details purchaser obligations for maintaining warranty validity and claim procedures.
Need help?
Do you have a question about the WMU 230 and is the answer not in the manual?
Questions and answers