Table of Contents
Advertisement
Advertisement
Table of Contents
Troubleshooting
Related Manuals for Stiga Park Pro 4WD
Summarization of Contents
General Instructions
1.1 Introduction
Covers manual usage, abbreviations, and responsibility declaration.
1.2 Safety Precautions
Details essential safety measures and warnings for operating and maintaining the machine.
1.3 Unpacking and Assembly
Guides on unpacking, assembly, and initial checks of the machine.
1.4 Service
Outlines different service intervals and points for maintaining the machine.
1.5 Transmission Data
Provides oil type, volume, and filter change intervals for transmissions.
1.6 Technical Specifications
Lists general tightening torques for screws and nuts on the machine.
1.7 Instructions for Use
Refers users to the owner's manual for specific operational guidance.
Chassis and Body
2.1 Rear Wheel Assembly
Detailed steps for assembling the rear wheel, including torque specifications.
2.2 Chassis Lubrication
Instructions on lubricating various chassis components and intervals.
2.3 Hydraulic Pump
Procedures for dismantling and assembling the hydraulic pump.
Steering System
3.1 System Description
Explains mechanical and hydraulic steering system principles and components.
3.2 Steering Wire Replacement & Adjustment
Covers replacement and adjustment procedures for steering wires and chains.
3.3 Steering Shaft Bearings
Details the replacement of steering shaft bearings and troubleshooting.
Hydraulic System
4.1 Safety Precautions
Crucial safety guidelines for working with hydraulic systems under pressure.
4.2 System Configuration
Details various machine configurations and their hydraulic system components.
4.3 Integrated Hydraulic Pump
Physical and functional description of the hydraulic pump integrated into the rear axle drive.
4.4 Separate Hydraulic Pump
Explains the physical arrangement and function of separate hydraulic pumps.
4.5 Hydraulic Assisted Steering & Lifter
Describes hydraulic steering and implement lift systems for 4WD models.
4.6 Hydraulic Assisted Steering (2WD)
Details the hydraulic assisted steering system for 2WD machines.
4.7 Trouble Shooting
Provides troubleshooting steps and solutions for drive system faults.
4.8 External Hydraulic System
Discusses troubleshooting and adjustment for external hydraulic assisted steering and lifting.
4.9 Transmission Oil Change
Procedures for changing transmission oil and filter in 4WD models.
Belt System
5.1 Belt Theory and Importance
Explains belt theory and the importance of using original spare parts belts.
5.2 Belt Replacements
Provides guidelines and warnings for replacing belts, including pulley nut tightening.
Control Wires
6.1 Control Wire Description
Describes the components and function of control wires and rods.
6.2 General Measures & Elbow Links
Covers general measures and procedures for changing/apartting elbow links.
6.3 HST Control Wire (2WD/4WD)
Details replacement and adjustment of HST control wires for 2WD and 4WD models.
6.4 HST Control Wire (4WD Ext. Pump)
Covers replacement and adjustment of HST control wires for 4WD models with external pumps.
6.5 Brake/Clutch Adjustment
Explains adjustment procedures for brake and clutch systems.
6.6 PTO Wire Replacement & Adjustment
Covers replacement and adjustment of PTO engagement wires and brakes.
Electrical System
7.1 System Description
Explains electrical system components, safety circuits, and wiring diagrams.
7.2 Troubleshooting Guide
Provides systematic troubleshooting for electrical function failures.
7.3 Repair and Replacements
Details procedures for replacing switches, switch knobs, and connectors.
Need help?
Do you have a question about the Park Pro 4WD and is the answer not in the manual?
Questions and answers