Related Manuals for ThermoSphere DC-W
Summarization of Contents
Installing your thermostat
Switch off mains power
Essential first step for safe electrical installation, involving disconnecting power supply.
Choose a location
Guidance on selecting an appropriate wall location for thermostat mounting.
Maximum distances
Specifies the maximum allowable distances for thermostat and sensor probe placement.
Wiring diagram
Detailed diagram for connecting UFH, appliance, power supply, and floor sensor.
Fix to the wall
Instructions on physically mounting the thermostat unit to the wall.
Settings
Time & date
Procedure for setting the current date and time on the thermostat.
Heating schedule
Setting up automatic temperature schedules for underfloor heating and appliances.
Display settings
Customizing screen brightness, timer, wallpaper, and orientation.
Pre set temperatures
Configuring comfort, eco, and holiday temperature presets.
Sensor mode
Selecting between floor, ambient, or combined sensor operation modes.
Advanced settings
Accessing and configuring detailed calibration, language, and reset options.
Appliance controls
On
Manual operation mode to keep the appliance constantly on.
Schedule
Operating the appliance based on its programmed heating schedule.
Appliance boost
Temporarily activating the appliance for 1, 2, or 4 hours.
Heating modes
Eco
Low-temperature setting for energy saving while maintaining floor comfort.
Comfort
Higher temperature setting for keeping the room warm and comfortable.
Schedule
Operating the thermostat according to the programmed heating schedule.
Manual
Manually setting and adjusting the temperature without using a schedule.
Holiday
Low frost protection temperature setting for when the property is unoccupied.
Energy saving features
Adaptive Start
Thermostat learns heat-up times to achieve target temperature precisely when scheduled.
Open Window Detector
Detects rapid temperature drops and pauses heating to save energy.
Advanced settings
Maximum Temp Limit
Sets the upper limit for the thermostat's temperature control.
Minimum Temp Limit
Sets the lower limit for the thermostat's temperature control.
Maximum Set Temperature
Defines the highest temperature the user can manually set.
Floor Temperature Calibration
Adjusts for sensor inaccuracies to ensure correct floor temperature readings.
Ambient Temp. Calibration
Adjusts for sensor inaccuracies to ensure correct ambient temperature readings.
Sensor Calibration
Calibrates the thermostat to specific floor sensor resistance values.
Rail Control
Enables or disables control for an attached appliance like a towel rail.
Language
Selects the display language for the thermostat interface.
Factory reset
Restores the thermostat to its original default settings.
OWD Off Time
Sets duration for which heating remains off after Open Window Detection.
OWD Temperature Drop Limit
Defines the temperature drop threshold for Open Window Detection.
OWD Heating on again after
Sets the time until heating can resume after Open Window Detection.
Need help?
Do you have a question about the DC-W and is the answer not in the manual?
Questions and answers