Table of Contents
Advertisement
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that on which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
For Users in Canada
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
2.2
Software - MA Netcontrol
MA Netcontrol is a powerful tool for monitoring and controlling Martin Audio Q-series amplifiers that are
equipped for use with the NomadLink network.
To fully realise the power and flexibility of this program, we suggest that you refer to this manual during
setup, and also keep it handy for reference until you are fully familiar with system configuration and all
operating modes.
MA Netcontrol runs on a standard Windows PC equipped with an Ethernet interface.
Working in conjunction with the MA-NET1 NomadLink/Ethernet Bridge, MA Netcontrol allows detailed
monitoring of amplifier parameters while controlling key functions such as power on/off, mute and solo.
Although it is remarkably intuitive and easy to use, MA Netcontrol is a powerful tool for monitoring and
controlling systems of any size – from a few channels in a small venue to literally thousands of channels in
the largest imaginable stadium or theme park system.
This manual is structured to serve as a setup guide and a reference. The following two sections (3 and 4) will
guide you through installation of the MA Netcontrol software program and setup of Ethernet connections to
one or more subgroups, each controlled by an MA-NET1.
Section 5 is a Quick Guide for accessing basic control and monitoring functions. Section 6 details all
operating modes, menu options, offline system configuration, and match functions, along with the various
warning and fault indications.
3
Installing the MA Netcontrol software
3.1
Computer system requirements
Operating system: Windows 2000 or Windows XP
Processor: Intel Pentium 4 or XP-compatible equivalent (Celeron M, Athlon etc.)
RAM: 512 MB minimum
Hard drive free space: 20 MB
Monitor: 800 x 600 24-bit color
Network: Ethernet 10/1 00 Mbit
Screen resolution is fixed at 96 DPI. Altering this setting will impair the operation of MA Netcontrol so is not
advised.
7
Advertisement
Table of Contents
