Device Details - Martin Audio MA NETCONTROL User Manual

6.7.3 Device details

The Match Device tab displays information on the match status (if any) between the configured device and
data uploaded from the physical device. (Figure 16)
The DIP Switches tab displays DIP switch positions of the configured device and the matched physical
device, if any (physical device status is shown only when power is on). Positions of DIP switches may be
changed on a configured "virtual" device by clicking on them. Any resulting mismatch is indicated by a red
fault or yellow warning LED. (Figure 17)
Note: The physical position of amplifier DIP switches cannot be changed by MA Netcontrol.
Figure 16
Figure 17
27