Related Manuals for Taco ES2 SOLAR
Summarization of Contents
4 Important Safety and Installation Instructions
Safety Precautions
Details crucial safety precautions, electrical hazards, and handling guidelines.
5 Field of Application
5.1 Types of System
Lists various heating and solar thermal systems suitable for ES2, ES2 ADAPT, ES2 SOLAR, and ES2 PURE models.
5.2 Pumped Liquids
Specifies approved liquids for heating and domestic hot water systems, and disallowed liquids.
6 Product Information
6.1 Description of the Product
Introduces the ENERGY SAVING circulator range, highlighting its features and technology.
6.2 Type Key
Explains the coding system used to identify different models and their specifications.
6.3 Name Plate
Details the information found on the circulator's name plate, including type, code, power, and efficiency.
6.4 Components
Illustrates and lists the main components of the circulator.
6.5 Technical Data
Provides detailed specifications such as power supply, operating temperatures, pressures, and sound levels.
7 Installation at Site
7.1 Installation
Covers general installation requirements and best practices for mounting the circulator.
7.2 Permissible Installation Positions
Shows acceptable mounting orientations for the circulator's motor shaft.
7.3 Motor Housing Positions
Illustrates how the motor body can be rotated for flexible installation.
7.4 Insulation of Pump Housing
Explains how to insulate the pump housing and piping to reduce heat loss.
9 Commissioning
9.1 Start-up of the Circulator
Emphasizes avoiding dry operation and filling the system completely before startup.
9.2 Operating Elements
Describes the selector and LED light used for controlling and monitoring the circulator.
9.3 Mode of Operation
Explains the different operating modes (activeADAPT, P, C, min-max) indicated by the LED.
9.4 Automatic Detection of Air - Vent System
Details the process for detecting and venting air from the system using the circulator's features.
11 Performance Curves
11.1 Performance Curves - ES2 60
Shows head vs. flow rate curves for the ES2 60 model.
11.2 Performance Curves - ES2 70
Shows head vs. flow rate curves for the ES2 70 model.
11.3 Performance Curves - ES2 C 60
Shows head vs. flow rate curves for the ES2 C 60 model.
11.4 Performance Curves - ES2 C 70
Shows head vs. flow rate curves for the ES2 C 70 model.
11.5 Performance Curves - ES2 ADAPT 60
Shows head vs. flow rate curves for the ES2 ADAPT 60 model.
11.6 Performance Curves - ES2 ADAPT 70
Shows head vs. flow rate curves for the ES2 ADAPT 70 model.
11.7 Performance Curves - ES2 SOLAR 60
Shows head vs. flow rate curves for the ES2 SOLAR 60 model.
11.8 Performance Curves - ES2 SOLAR 70
Shows head vs. flow rate curves for the ES2 SOLAR 70 model.
11.9 Performance Curves - ES2 PURE C 40
Shows head vs. flow rate curves for the ES2 PURE C 40 model.
13 Faults, Causes, and Remedies
13.1 Fault Finding Table
Lists faults, their causes, control panel indications, and recommended remedies.
13.2 Unlocking Procedure
Describes the steps to unlock the circulator after a fault condition.
Need help?
Do you have a question about the ES2 SOLAR and is the answer not in the manual?
Questions and answers