Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for PowerBass XMA-3000D
Summarization of Contents
TECHNICAL FEATURES
INSTALLATION EXPERIENCE
Guidance on professional installation and general operational instructions.
PREPARING FOR INSTALLATION
Lists required tools for basic installation of the amplifier.
INSTALLATION PRECAUTIONS
MOUNTING THE AMPLIFIER
Instructions and considerations for physically mounting the amplifier unit.
CONTROL PANEL FUNCTIONS
Line Input (RCA) Jacks
Describes RCA input jacks and required source unit output levels.
Gain Control
Explains how to match amplifier sensitivity to the source unit.
AUTO-TURN ON
Describes the feature eliminating the need for a remote wire.
PHASE Switch
Allows correction of phase or time delay effects in the system.
CONTROL PANEL FUNCTIONS
FUSES
Details fuse ratings, replacement, and external fuse requirements.
BATT+ (Power Input Connection)
Explains the main power input connection to the amplifier.
REM (Remote Input Connection)
Explains how to connect the remote turn-on signal.
GND (Ground Input Connection)
Instructions for creating a proper ground connection for the amplifier.
POWER WIRING AND SIGNAL CONNECTIONS
Power Input Connection Diagram
Illustrates the power input connection for the amplifier.
POWER WIRING
GND (Ground)
Instructions for creating a proper ground connection for the amplifier.
POWER WIRING
REM (Remote Trigger)
Details the connection for the remote turn-on signal.
FUSE REQUIREMENTS
Emphasizes the need for external fuses for vehicle system protection.
AUTO TURN-ON Button
Explains the high-level auto turn-on feature and its activation.
RCA INTERCONNECT WIRING
Low Level Input
Guidance on selecting and routing RCA audio cables for signal connection.
SET UP ADJUSTMENTS
Input GAIN Adjustment
Step-by-step guide to correctly set the amplifier's gain control.
SUB SONIC 40 Click Detent Control
Explains the subsonic filter's function and proper setting for speaker protection.
SET UP ADJUSTMENTS
LPF (Low Pass Filter) Adjustment
Describes how to use the Low Pass Filter to limit frequencies to the woofer.
Adjusting the BASS EQ and BASS FREQ Controls
Guide to adjusting Bass EQ and Bass Frequency for desired sound.
SPEAKER WIRING AND CONFIGURATIONS
SPEAKER OUTPUT CONFIGURATIONS
Instructions on connecting speakers to the amplifier's output terminals.
XMA-2000D SPEAKER OUTPUT CONFIGURATIONS
SPEAKER LOAD
Details the minimum speaker impedance requirements for this model.
Need help?
Do you have a question about the XMA-3000D and is the answer not in the manual?
Questions and answers