Cisco XENPAK-10GB-SR Installation Notes

Cisco 10-Gigabit Ethernet XENPAK Transceiver
Modules Installation Note
Revised: January 20, 2012
Product Numbers:
XENPAK-10GB-LW=
XENPAK-10GB-LX4=
This installation note provides instructions for installing the 10-Gigabit XENPAK transceiver modules.
The XENPAK transceiver connects the electrical circuitry of the switch or router with the optical or
copper network.
Contents
This document contains these sections:
•
•
•
•
•
•
•
•
Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
XENPAK-10GB-SR=
XENPAK-10GB-ER=
XENPAK-10GB-CX4=
Overview, page 2
Safety, page 6
Required Tools, page 13
Installing the XENPAK Transceiver, page 13
Removing the XENPAK Transceiver, page 15
Translated Safety Warnings, page 17
Related Documentation, page 24
Obtaining Documentation and Submitting a Service Request, page 24
XENPAK-10GB-LR= XENPAK-10GB-LR+=
XENPAK-10GB-ER+= XENPAK-10GB-ZR=
DWDM-XENPAK-xx.xx=