Table of Contents
Advertisement
CentraLine I/O Modules
CONTENTS
Safety Information ............................................................... 2
General Safety Information ............................................. 2
Safety Information as per EN60730-1 ............................. 2
System Overview ................................................................ 3
System Architecture ........................................................ 3
CentraLine I/O Modules and Sockets ............................. 4
Interfaces and Bus Connections ..................................... 7
Technical Data ................................................................. 7
Planning ............................................................................... 8
Overview .......................................................................... 8
Transformer Selection ..................................................... 8
Fusing Specifications ...................................................... 9
System Protective Earth Grounding ................................ 9
Lightning Protection ......................................................... 9
Panel Bus Topologies ..................................................... 9
Bus Topologies ............................................. 9
Cable Specifications ........................................................ 9
Dimensions .................................................................... 11
Mounting/Dismounting Modules ..................................... 12
Mounting/Dismounting Modules / Sockets .................... 12
Mounting/Dismounting Electronic Modules ................... 14
Mounting/Dismounting Cross Connectors .................... 15
Mounting/Dismounting Swivel Label Holders ............... 15
Wiring and Setting up the System .................................. 16
General Safety Considerations ..................................... 16
Wiring Push-in Terminals .............................................. 16
Connecting Power Supply ............................................. 17
Connecting Single Bus Controller Systems .................. 17
Connecting Panel Bus and L
Controller Systems ........................................................ 18
Addressing Panel Bus I/O Modules .............................. 20
Connecting Field Devices ............................................. 20
Commissioning and Updating Firmware ....................... 21
Description of the CentraLine I/O Modules .................... 22
Common Features ......................................................... 22
Analog Input Modules .................................................... 22
Analog Output Modules ................................................. 27
Binary Input Modules ..................................................... 33
Relay Output Modules ................................................... 36
Copyright © 2019 Honeywell GmbH ● All Rights Reserved
W
Bus Mixed
ON
ORKS
Installation &
Commissioning
Instructions
INSTALLATION AND COMMISSIONING INSTRUCTIONS
Floating Output Module ................................................. 41
Mixed Panel Bus I/O Modules ....................................... 45
Description of Extra Parts ................................................ 49
XS814 Auxiliary Terminal Package ............................... 49
XS830 Auxiliary Terminal Package ............................... 49
XS831 Auxiliary Terminal Package ............................... 49
XS815 Cross Connectors .............................................. 50
XAL10 Swivel Label Holders ......................................... 50
XAL11 Swivel Label Holders ......................................... 50
XS816 Bridge Connectors ............................................. 50
LonWorks Software Interface Description ...................... 51
Overview ........................................................................ 51
CLIOL821A Analog Input Module .................................. 51
CLIOL(R)822A Analog Output Module .......................... 53
CLIOL823A Binary Input Module ................................... 54
CLIOL(R)824A Relay Output Module ............................ 55
Troubleshooting ................................................................ 56
Testing Wiring Connections ........................................... 56
CentraLine I/O Module Troubleshooting ....................... 56
Appendix: Sensor Characteristics ................................... 60
BALCO 500 .................................................................... 60
NTC 20 k ..................................................................... 61
PT 1000 .......................................................................... 62
NI1000TK5000 ............................................................... 64
NTC 10 kΩ ..................................................................... 65
PT 3000 .......................................................................... 66
Johnson A99 PTC Thermistor ....................................... 67
Trademark Information
Echelon, LON, L
M
ON
trademarks of Echelon Corporation registered in the United
States and other countries.
3.4
CentraLine
I/O MODULES
, L
T
, L
W
, Neuron, are
ARK
ON
ALK
ON
ORKS
EN1Z-0973GE51 R0119
Advertisement
Table of Contents
Related Manuals for CentraLine CLIOP824A
Summarization of Contents
Safety Information
General Safety Information
General safety precautions for installation and operation.
Safety Information as per EN60730-1
Safety information according to EN60730-1 standard.
System Overview
System Architecture
Overview of the typical controller system architecture.
CentraLine I/O Modules and Sockets
Module Types and Terminal Sockets
Description of pluggable and mixed I/O modules, and terminal sockets.
CentraLine I/O Module Overview
Module Overview Table
Overview table of CentraLine I/O modules and their specifications.
Manual Overrides
Details on manual override functions for output modules.
Auxiliary and Spare Parts
Auxiliary Terminal Packages
Details on XS814, XS830, XS831 auxiliary terminal packages.
Spare Parts
Information on spare parts like connectors and label holders.
Interfaces, Bus Connections, and Technical Data
Interfaces and Bus Connections
Details on Panel Bus and LONWORKS Bus communication.
Technical Data Overview
Overview of system data, constraints, standards, and environment.
Planning Overview
Transformer Selection
Guidance on selecting appropriate transformers for the system.
Power Supply Requirements
Information on current requirements for I/O modules.
Fusing, Grounding, and Bus Topologies
Fusing Specifications
Guidelines for selecting fuses for modules and devices.
Bus Topologies
Specifications for Panel Bus and LONWORKS Bus topologies.
Cable Specifications
Specifications for power supply and communication cables.
Cable Specifications
Panel Bus and LONWORKS Bus Cables
Cable specifications for Panel Bus and LONWORKS Bus.
Field Device Cables
Cable sizing and routing for connecting field devices.
Dimensions
Pluggable I/O Module Dimensions
Dimensional drawings of pluggable I/O modules.
Mixed I/O Module Dimensions
Dimensional drawings of mixed I/O modules.
Module Mounting and Sockets
Mounting Sockets
Instructions for mounting terminal sockets onto DIN rails.
Connecting Sockets
How to connect sockets using bridge connectors or wires.
Module and Socket Dismounting
Dismounting Sockets
Steps to disconnect and remove sockets.
Dismounting Modules
Procedures to dismount controller, terminal sockets, and I/O modules.
Electronic Module and Auxiliary Package Handling
Electronic Module Handling
Instructions for mounting and dismounting electronic modules.
Auxiliary Terminal Package Handling
Instructions for mounting/dismounting auxiliary terminal packages.
Handling Connectors and Label Holders
Auxiliary Package and Connector Handling
Procedures for handling auxiliary packages and cross connectors.
Swivel Label Holder Handling
Instructions for mounting and dismounting swivel label holders.
Wiring and System Setup
General Safety Considerations
General safety considerations for wiring and system setup.
Wiring Terminals
Wiring instructions for push-in and screw-type terminals.
Power Supply and System Connections
Connecting Power Supply
Connecting the controller system to power supply.
Single Bus Controller Systems
Connecting systems with Panel Bus or LONWORKS Bus modules.
Mixed Controller System Wiring
Connecting I/O Modules to Controller
Connecting I/O modules to the controller for Panel Bus and LONWORKS.
Mixed Bus System Wiring Examples
Correct and Incorrect Wiring Examples
Wiring examples for mixed bus systems, highlighting correct and incorrect connections.
Addressing and Field Device Cabling
Addressing Panel Bus I/O Modules
Procedure for assigning unique addresses to Panel Bus I/O modules.
Field Device Cabling
Cable routing and shielding guidelines for field devices.
Commissioning and Firmware Updates
Commissioning I/O Modules
Commissioning process for Panel Bus and LONWORKS Bus I/O modules.
Updating Software
Updating software for Panel Bus and LONWORKS Bus I/O modules.
CentraLine I/O Module Descriptions
Common Features
Common features of CentraLine I/O modules, switches and LEDs.
Analog Input Modules
Description of Analog Input Modules, their types, and features.
Analog Input Module Details
Terminals and Technical Data
Terminal assignments, technical data, and sensor accuracy for analog inputs.
Sensor Accuracy
Accuracy specifications for various analog input sensors.
Analog Output Modules
Module Types and Specifications
Overview of Analog Output Modules, their types, and terminal sockets.
Features and Terminals
Features of Analog Output Modules and their terminal assignments.
Analog Output Module Data and Behavior
Technical Data and LED Behavior
Technical data, status LED behavior, and manual overrides.
Manual Override and Configuration
Manual override behavior in AUTO and Override positions.
Binary Input Modules
Module Types and Specifications
Overview of Binary Input Modules, their types, and specifications.
Features and Terminals
Features of Binary Input Modules and their terminal assignments.
Binary Input Module Data and Configuration
Technical Data and Fast Totalizer Configuration
Technical data and configuration of binary inputs as fast totalizers.
Status LED Behavior
Status LED behavior for binary input modules.
Relay Output Modules
Module Types and Specifications
Overview of Relay Output Modules, their types, and specifications.
Features and Terminals
Features of Relay Output Modules and their terminal assignments.
Relay Output Module Terminal Details and Loads
Terminal Description, Permissible Loads, and LED Behavior
Terminal descriptions, permissible loads, and status LED behavior.
Relay Output Module Manual Override Behavior
Status LEDs and Manual Override Positions
Status LED behavior and manual override settings for relay outputs.
Floating Output Module
Features and Permissible Loads
Features and permissible loads for the Floating Output Module.
Floating Output Module Terminals and Behavior
Terminals, Descriptions, LED, and Manual Override Behavior
Terminals, descriptions, LED behavior, and manual override settings.
Floating Relay Output Configuration
Configured and Unconfigured Floating Outputs
Behavior of configured and unconfigured floating relay outputs.
Mixed Panel Bus I/O Modules
Features and Permissible Loads
Features and permissible loads for Mixed Panel Bus I/O Modules.
Mixed Panel Bus I/O Module Terminals and Specifications
Terminal Details and Module Specifications
Terminal assignments, descriptions, and specifications for mixed I/O modules.
Description of Extra Parts
Auxiliary Terminal Packages (XS814, XS830, XS831)
Details on mounting and features of XS814, XS830, XS831 auxiliary terminal packages.
Accessories
Cross Connectors, Label Holders, and Bridge Connectors
Features of XS815 Cross Connectors, XAL10/XAL11 Label Holders, and XS816 Bridge Connectors.
LonWorks Software Interface Description
Overview, Protocol, and Analog Input Module
Overview of LonWorks interface, LonTalk protocol, and CLIOL821A module.
Input Types and Network Variables
Mapping of input types to Network Variables (NVs).
LonWorks Variable Descriptions
Analog Input Variables
Descriptions of nvoAiValuePct, nvoAiTempP, and nvoAiTemp variables.
Digital Input Variable
Description of the nvoAiSwitch variable for slow digital input.
CLIOL(R)822A Analog Output Module
Analog Output Control and Behavior
Analog output control level and startup/heartbeat behavior.
Analog Output Feedback and Command
Feedback and Command Variables
Descriptions of analog output feedback and command variables.
CLIOL823A Binary Input Module
LonWorks interface for CLIOL823A Binary Input Module.
Relay and Input Command Variables
Relay Output Command and Module Description
Relay output command variable and CLIOL(R)824A module description.
Troubleshooting
Wiring Connections and I/O Module Troubleshooting
Methods for testing wiring and general I/O module troubleshooting.
Power LED Behavior
Power LED behavior and troubleshooting steps.
Module-Specific Troubleshooting
LED Tests and Analog Input Troubleshooting
Performing LED tests and troubleshooting analog input modules.
Module Troubleshooting Summary
Troubleshooting for Various Module Types
Summary of troubleshooting for analog, binary, relay, and floating output modules.
Appendix: Sensor Characteristics
BALCO 500 Sensor Data
Characteristic data for BALCO 500 sensors.
Need help?
Do you have a question about the CLIOP824A and is the answer not in the manual?
Questions and answers