Advertisement
Table of Contents
- 1 Table of Contents
- 2 Introduction
- 3 IRIS Communication Mechanism (Polling / Alarms)
- 4 Product Features
- 5 Package Contents
- 6 Board Configuration
- 7 Before You Start
- 8 Installing the IRIS Touch Dialler
- 9 Main Menu (Only Accessible Via USB Connection)
- 10 Trouble Report
- 11 Installation for EN54-21 Compliant Fire Applications
- 12 Maintenance
- 13 Specifications
- Download this manual
Advertisement
Table of Contents
Related Manuals for Chiron Iris Touch 640NG
Summarization of Contents
IRIS Communication Mechanism Explained
Key Features of IRIS Communication
Highlights key features like independent certification, authentication, variable polling, TCP/IP protocol, and outbound communication.
IRIS Touch Board Configuration and LEDs
IRIS Touch LED Indicators and Meanings
Explains the meaning of different LED states for system status and communication.
IRIS Touch Pre-Installation Requirements
Monitoring Centre Information Needed
Details information required from the monitoring centre for system setup.
Ethernet Connection Setup Details
Lists network details required for Ethernet connection.
GPRS/3G SIM and APN Configuration
Specifies information needed for GPRS/3G SIM card and APN setup.
Installing the IRIS Touch Dialler
IRIS Touch Dialler Mounting Instructions
Guides on selecting a suitable location and securing the dialler unit.
IRIS Touch Dialler Power Supply
Details power source requirements and connection methods for the dialler.
IRIS Touch Dialler Connection Overview
Explains how to connect Ethernet, GPRS/3G antenna, and optional serial connections.
IRIS Touch Specific Panel Connection Guides
RS485 Panel Connection Details
Details RS485 wiring for Honeywell Galaxy and Risco ProSys panels.
TTL Panel Connection Details
Explains TTL connections for Texecom Premier panels.
IRIS Touch Dialler Installation Steps
GPRS/3G SIM Card and Pin Input Setup
Details SIM card insertion, pin input usage, and initial power-up checks.
GPRS/3G Network Signal Strength Test
Explains how to perform a signal strength check for GPRS/3G connection.
IRIS Touch Dialler Configuration Methods
Resetting IRIS Touch Dialler to Defaults
Provides steps to perform a factory reset on the IRIS Touch dialler.
IRIS Touch Panel Integration Configuration
Details configuration via Honeywell Galaxy (RS485) and Texecom Premier (Serial TTL) panels.
GPRS/3G Configuration via SMS Message
Describes how to configure GPRS APN using an SMS message.
Honeywell Galaxy Engineer Mode Setup
Galaxy Communication Settings Configuration
Covers Ethernet, Alarm Reporting, and Remote Access settings within Galaxy.
Galaxy Engineer Test Procedure
Explains how to perform an engineer test to verify alarm reception.
Texecom Premier Serial TTL Configuration
Texecom GPRS/3G Configuration via SMS
Describes configuring GPRS APN via SMS for Texecom panels.
Texecom Premier Elite Configuration
Texecom Configuration Parameters
Covers UDL/DIGI, IP Data, and GPRS Data settings for Texecom panels.
IRIS Touch Installation Wizard Guide
Installation Wizard Interface Selection
Allows selection of communication paths like Ethernet and GPRS/3G.
Installation Wizard Additional Options
Options for Alarm Override, Monitor Serial, and Roaming SIM.
IRIS Touch Ethernet Connection Setup
Ethernet Connection Verification
Verifies the physical Ethernet connection status.
IRIS Touch Dialler IP Address Configuration
Allows setting the dialler IP address via DHCP or a fixed IP.
IRIS Touch Ethernet Communication Tests
Ethernet Test Poll Verification
Explains successful and failed outcomes for the Ethernet test poll.
Ethernet Test Alarm Verification
Explains successful and failed outcomes for the Ethernet test alarm.
IRIS Touch GPRS/3G Connection Setup
GPRS/3G Configuration and Testing
Covers GPRS/3G settings, signal strength, registration, and test polls/alarms.
IRIS Touch Pin Alarm Configuration
Pin Input Protocol Configuration
Covers SMS, Monitor Cable, Enable, Inverse, Phone Number, and Message settings.
IRIS Touch Settings Menu Options
IRIS Touch Key Configuration Settings
Covers Network Interfaces, Account Name/Number, ARC IP Address, and Dialler IP Address.
IRIS Touch GPRS/3G Settings Configuration
GPRS/3G Settings Management
Covers Signal Strength, Network Scan, APN, User Name, Password, SIM PIN, Call Barring, Roaming SIM.
IRIS Touch Panel Interface Options
Serial Port Configuration Options
Details Serial TTL, RS232_1 port settings, including Monitor Cable and Poll Fail.
Serial RS485 Port Configuration Options
RS485 Mode Specific Settings
Covers System ID and Emulation Mode for Galaxy RS485.
IRIS Touch Extra Features Overview
Set/Unset and Input Configuration
Configures Set/Unset pins, including assignment, trigger mode, and delays.
IRIS Touch Pin Input Functionality
Pin Input Protocol Configuration
Covers SMS, Monitor Cable, Enable, Inverse, Phone Number, and Message settings.
IRIS Touch SIA Input Protocol Configuration
SIA Input Settings
Covers SMS, Monitor Cable, Enable, Inverse Polarity, and Message configuration.
IRIS Touch Fast Format Input Protocol Configuration
Fast Format Input Settings
Covers SMS, Monitor Cable, Enable, Alarm, O/C, and Inverse Polarity options.
IRIS Touch Contact ID Input Protocol Configuration
Contact ID Input Settings
Covers SMS, Monitor Cable, Enable, Inverse Polarity, Event, Group, and Zone settings.
IRIS Touch Trouble Reporting Setup
Trouble Reporting Methods and Diagnostics
Covers reporting via Relays, SMS, and setting up diagnostic call IP addresses.
Relay SMS Activation
Relay SMS Activation Settings
Covers phone number, activation/deactivation messages for relay control.
IRIS Touch Unit Reflash Procedure
Reflash Password Configuration
Changes or enters the password for the reflash server.
Alternate Reflash IP Address Setting
Sets an alternate IP address for the reflash server.
Initiate IRIS Touch Reflash
Starts the process of reflashing the unit to the latest software.
IRIS Touch Communication Tests
IRIS Touch Communication Path Test
Starts polling and alarm tests over enabled communication paths.
Simulate GPRS/3G Fault Test
Simulates a GPRS/3G fault for monitoring centre testing.
IRIS Touch Test Result Explanations
Communication Test Results and Troubleshooting
Explains outcomes for Ethernet and GPRS/3G connection, poll, and alarm tests.
IRIS Touch Trouble Reporting Overview
IRIS Touch LED Status Indicators
Explains the meaning of different LED states for system status and communication.
IRIS Touch System Trouble Report Details
Common Trouble Report Explanations
Provides explanations for disconnection, polling fail, registration, SIM, poll, dial port, pin, serial, and communication faults.
EN54-21 Compliant Fire Application Installation
Introduction to EN54-21 Compliance
Introduces EN54-21 certification and applicable IRIS Touch models.
EN54-21 Equipment Description
Describes how IRIS Touch diallers transfer fire alarms over IP networks.
EN54-21 Installation and Configuration
Outlines installation, configuration, and commissioning requirements for EN54-21.
EN54-21 Fire Control Equipment Interface
EN54-21 Fire Input and Relay Configuration
Configures fire alarm/fault inputs, end of line resistors, and relay outputs for EN54-21.
IRIS Touch Maintenance Procedures
Confirming IRIS Touch Current Status
Checks the current status of the IRIS Touch unit via LEDs.
IRIS Touch Communication Path Testing
Tests communication paths by removing one path and sending alarms.
Testing Alarm Panel and ARC Communication
Performs alarm tests and confirms reception at the monitoring centre.
IRIS Touch Technical Specifications
IRIS Touch Key Technical Specifications
Covers transmission paths, IP, alarm transmission, relay outputs, power supply, environmental, and physical specs.
IRIS Touch Safety Precautions
Safety Extra-Low Voltage (SELV) Definition
Defines SELV and its application to IRIS Touch interfaces.
IRIS Touch European Directive Conformance
IRIS Touch Standards and Certifications
Details compliance with EN50131, EN50136, EN54-21, Security Grade 4, and VdS.
Need help?
Do you have a question about the Iris Touch 640NG and is the answer not in the manual?
Questions and answers