Related Manuals for AND MPA-200
Summarization of Contents
Instruction Manual and Product Introduction
Pipette Model Identification
Identifies the MPA and MPB series of single and multi-channel electronic pipettes.
Manual Structure and Content
Introduces the organization and purpose of the instruction manual's sections.
Safety Guidelines and Warning Definitions
Definition of Safety Alert Symbols
Defines DANGER, WARNING, CAUTION, and NOTE symbols used in the manual.
Safe Pipette Operation Precautions
Covers essential safety measures for operating the pipette and handling hazardous materials.
Lithium-Ion Battery Safety
Details critical safety guidelines for handling and charging the lithium-ion battery.
Pipette Setup and Preparation
Package Contents and Item List
Lists all accessories and components included with the MPA/MPB pipettes.
Installing and Charging the Battery
Step-by-step instructions for battery installation and initial recharging.
Exchangeable Power Plug Configuration
Guide on how to change the AC adapter's power plug for different regions.
Pre-Operation Checks and Pipette Handling
Covers holding the pipette, operating modes, and powering the device on/off.
Pipette Parts Identification
Identifies all parts of the MPA and MPB pipette series and their materials.
Precautions Before Dispensing Operations
Critical checks and considerations before performing any dispensing operations.
Pipette Operational Modes and Functions
Display Symbols and Key Functions
Explains the symbols on the display and the functions of all pipette keys.
Standard Mode (AUTO) Operation Guide
Detailed guide for basic single aspiration and dispensing operations.
Multiple Dispensing Mode (MD) Usage
Instructions for performing multiple dispensings from a single aspiration cycle.
Mixing Mode (MIX) Operation Guide
How to use the pipette for mixing liquids via repeated aspiration/dispensing.
System Setting Mode (SYS) Configuration
Configuration of settings like speed, buzzer, blowout, and reverse operation.
Program Setting Mode for Custom Presets
Saving and recalling frequently used pipette settings for efficiency.
Reverse Operation for Viscous Liquids
Using reverse operation to accurately dispense liquids that tend to remain in the tip.
Blowout Function for Complete Dispensing
Forcibly dispensing the residual liquid left in the pipette tip.
Advanced Dispensing Job Modes Explained
Details on combined modes like AUTO+MIX, Sequential Aspirating, and Dispensing.
Ensuring Pipetting Accuracy and Calibration
Accurate Pipetting Techniques and Tips
Best practices for aspiration, tip immersion depth, and pipette angle.
Volume Calibration Procedure (µL)
Step-by-step guide to calibrate the dispensed volume using an electronic balance.
Resetting Pipette Volume Calibration
Restoring the pipette's volume calibration data to factory defaults.
Dispensing by Weight (mg Unit) Function
Instructions for selecting and using the pipette's weight-based dispensing function.
Weight Calibration Procedure (mg)
Calibrating the dispensed weight (mg) accurately with an electronic balance.
Pipette Maintenance, Troubleshooting, and Repair
Adjusting Tip Ejector Height
Guidance on adjusting the tip ejector to accommodate different tip sizes.
Pipette Part Replacement and Cleaning
Procedures for replacing the lower part and cleaning the tip holder.
Autoclave Sterilization Guidelines
Instructions for autoclaving the pipette's lower part according to specifications.
Troubleshooting Common Pipette Issues
A comprehensive guide to diagnosing and resolving issues with the pipette.
Procedure for Pipette Repair Requests
Steps to follow and information needed when sending the pipette for repair.
Product Specifications and Accessories
Detailed Pipette Technical Specifications
Technical specifications, performance data, and operating conditions for MPA/MPB models.
Optional Pipette Stands and Hangers
Information on available accessories for pipette storage and charging.
Compatible Pipette Tips, Boxes, and Filters
Lists specific pipette tips, tip boxes, and filters compatible with the models.
User-Replaceable Pipette Components
Details on disposable parts like lower units, cylinder units, batteries, and adapters.
Pipette Inspection and Testing Equipment
Information on specialized equipment for checking pipette leakage and accuracy.
Need help?
Do you have a question about the MPA-200 and is the answer not in the manual?
Questions and answers